Machine Model | Plastic Injection Mould Machine | |||||
Injection Unit | 100T | |||||
Screw Diameter | mm | 32 | 35 | 38 | ||
Screw L/D Ratio | L/D | 23.5 | 22 | 18.5 | ||
Theoretical Shot Volume | cm3 | 140 | 168 | 198 | ||
Injection Weight (PS) | g | 128 | 153 | 180 | ||
Injection Rate (PS) | g/s | 81.2 | 92 | 113 | ||
Plasticizing capacity | g/s | 10.6 | 11.9 | 14.7 | ||
Injection Pressure | KPa | 205 | 180 | 127 | ||
Screw Speed | rpm | 0-250 | ||||
Clamping Unit | ||||||
Clamp force | KN | 1000 | ||||
Mold plate- stroke | m | 330 | ||||
Max mould thickness | mm | 400 | ||||
Min mould thickness | mm | 110 | ||||
Space between tie bars | mm | 365*365 | ||||
Hydraulic Ejector stroke | KN | 110 | ||||
Hydraulic injector force | mm | 35 | ||||
No. of ejector | PC | 5 | ||||
Other | ||||||
Max pump pressure | MPa | 16 | ||||
Pump motor power | KW | 11.7 | ||||
Heating power | KW | 6.4 | ||||
Hydraulic tank capacity | l | 170 | ||||
Machine size(L*W*H) | m | 4.2*1.25*1.75 | ||||
Machine weight | t | 3.2 |
Machine Model | Plastic Injection Mould Machine | |||||
Injection Unit | 100T | |||||
Screw Diameter | mm | 32 | 35 | 38 | ||
Screw L/D Ratio | L/D | 23.5 | 22 | 18.5 | ||
Theoretical Shot Volume | cm3 | 140 | 168 | 198 | ||
Injection Weight (PS) | g | 128 | 153 | 180 | ||
Injection Rate (PS) | g/s | 81.2 | 92 | 113 | ||
Plasticizing capacity | g/s | 10.6 | 11.9 | 14.7 | ||
Injection Pressure | KPa | 205 | 180 | 127 | ||
Screw Speed | rpm | 0-250 | ||||
Clamping Unit | ||||||
Clamp force | KN | 1000 | ||||
Mold plate- stroke | m | 330 | ||||
Max mould thickness | mm | 400 | ||||
Min mould thickness | mm | 110 | ||||
Space between tie bars | mm | 365*365 | ||||
Hydraulic Ejector stroke | KN | 110 | ||||
Hydraulic injector force | mm | 35 | ||||
No. of ejector | PC | 5 | ||||
Other | ||||||
Max pump pressure | MPa | 16 | ||||
Pump motor power | KW | 11.7 | ||||
Heating power | KW | 6.4 | ||||
Hydraulic tank capacity | l | 170 | ||||
Machine size(L*W*H) | m | 4.2*1.25*1.75 | ||||
Machine weight | t | 3.2 |