Specifications
Plastic Injection Machinery1.250g Shoot Weight
2.150T Clamping Force
3.Suit for PE,PP,PS,ABS,PC,PVC
4.CE
180T High Quality Plastic Servo Injection Machine
1)Technical Parameter:
MACHINE MODEL | XT-H180 | |||
INJECTION UNIT | UNIT | A | B | C |
SCREW DIAMETER | MM | 40 | 45 | 50 |
SCREW L/D RATIO |
| 24.7 | 22 | 19.8 |
THEORETICAL SHOT VOLUME | CM3 | 282 | 358 | 442 |
INJECTION WEIGHE(PS) | G | 257 | 326 | 402 |
INJECTION RATE(PS) | G/S | 108 | 137 | 169 |
PLASTICIZING CAPACITY(PS) | G/S | 17.1 | 21.7 | 26.8 |
INJECTION PRESSURE | MPA | 234 | 185 | 149 |
SCREW SPEED | RPM | 0~220 | ||
MOULDING UNIT | ||||
CLAMPING FORCE | KN | 1800 | ||
SPACE BETWEEN TIE BARS(WxH) | MM | 480x480 | ||
MAX. MOULD THICKNESS | MM | 500 | ||
MIN. MOULD THICKNESS | MM | 150 | ||
MOULD PLATE STROKE | MM | 460 | ||
EJECTOR STROKE | MM | 140 | ||
EJECTOR FORCE | KN | 35 | ||
NO. OF EJECTOR | PC | 5 | ||
OTHERS | ||||
MAX. PUMP PRESSURE | MPA | 16 | ||
PUMP MOTOR POWER | KW | 18.5 | ||
HEATING POWER | KW | 9.3 | ||
HYDRAULIC TANK CAPACITY | L | 300 | ||
MACHINE SIZE(LxWxH) | M | 5.1x1.35x1.95 | ||
MACHINE WEIGHT | T | 6 |
2)Main features of the Machines:
- High speed system response and short molding cycle
- Largely decrease system oil temperature
- Reduce mold open and close crash to extend service time of machine and mold tool.
- To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
- Higher requirement for hydraulic oil; provides with imported high quality oil strainer.
3)Following is the essential information of mold, for your reference.
factory supply all kinds of pipes and fittings mould 2013 pvc pipe fittings making machinery mold