Specifications
Plastic Injection Machinery1.250g Shoot Weight
2.150T Clamping Force
3.Suit for PE,PP,PS,ABS,PC,PVC
4.CE
220T CE certificate Plastic Servo Injection Molding Equipment
1)Technical Parameter:
MACHINE MODEL | XT-H250 | |||
INJECTION UNIT | UNIT | A | B | C |
SCREW DIAMETER | MM | 50 | 55 | 60 |
SCREW L/D RATIO |
| 24.2 | 22 | 20.2 |
THEORETICAL SHOT VOLUME | CM3 | 520 | 629 | 749 |
INJECTION WEIGHE(PS) | G | 473 | 573 | 681 |
INJECTION RATE(PS) | G/S | 183.7 | 222.6 | 264.5 |
PLASTICIZING CAPACITY(PS) | G/S | 28.5 | 31 | 33.7 |
INJECTION PRESSURE | MPA | 215 | 178 | 150 |
SCREW SPEED | RPM | 0~185 | ||
MOULDING UNIT | ||||
CLAMPING FORCE | T | 250 | ||
SPACE BETWEEN TIE BARS(WxH) | MM | 570x570 | ||
MAX. MOULD THICKNESS | MM | 580 | ||
MIN. MOULD THICKNESS | MM | 200 | ||
MOULD PLATE STROKE | MM | 590 | ||
EJECTOR STROKE | MM | 150 | ||
EJECTOR FORCE | KN | 62 | ||
NO. OF EJECTOR | PC | 9 | ||
OTHERS | ||||
MAX. PUMP PRESSURE | MPA | 16 | ||
PUMP MOTOR POWER | KW | 22 | ||
HEATING POWER | KW | 12.28 | ||
HYDRAULIC TANK CAPACITY | L | 400 | ||
MACHINE SIZE(LxWxH) | M | 6.4x1.55x2.05 | ||
MACHINE WEIGHT | T | 7 |
2)Main features of the Machines:
- High speed system response and short molding cycle
- Largely decrease system oil temperature
- Reduce mold open and close crash to extend service time of machine and mold tool.
- To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
- Higher requirement for hydraulic oil; provides with imported high quality oil strainer.
3)appliction of the plastic injection machine
1)We provide 6 months machine warranty for good running working order.
2) We dis-assemble and re-assemble machine.
3) We clean the hydraulic tank, oil cooler and filter.
4)We check and repair Hydraulic pump.
5)We check and replace defective toggle with new one.
6)We check Clamping Cylinder pressure in good working order.
7) We replace defective hydraulic parts.
8)We inspect Screw & Barrel, to ensure free from injection back-flow.
9)Parts will be replaced if they do not meet the specific tolerances.
10)We check Control Cabinet completely and replace defective parts.
11) We replace oil seals and rings with leakage.
12)We replace defective ball-bearing of electric motor.
13)We test-run machines for at least 24 hours.
14)Machine is re-painted to look new.
Hebei Xiangte Plastic Injection Machinery Co., Ltd. Located in Shijiazhuang City, Near Tianjin. It is specialized offer Injection molding machine, injection mould and related auxiliary equipment.
1. Injection molding machine range: Clamping force from 50tons to1000tons, injection weight from 64g to 14000g.Except the normal machine, we also have special machine for PVC, PET, Variable Pump, clear double color, full Hydraulic
2. Injection mould: Home appliance, PVC pipe fitting, PPR fitting, Pallet, Crate, Pet perform, bucket, 5 Gallon bottle, blow mould, chair, Syringe, plug, CAP, Lid mould
3. Auxiliary equipment: Hopper dryer, Auto-Loader, Mixer, Crusher, Chiller, Air compressor, Air tank, filter, Air dryer etc.
"Professional, remarkable quality, sincerely service" is our pursuance, we are so pleased to provide both superior products and perfect service for customers all over the world.
Following is the essential information of mold, for your reference.
factory supply all kinds of pipes and fittings mould 2013 pvc pipe fittings making machinery mold