Name: Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation
Brand: YITENG
Availability: InStock

Product Details

Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

Product Description

1. Brief Introduction to Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

The processing of fluoroplastic is not easy, but we successfully overcome this technical difficulty, and this material is used to make our fluoroplastics insulated heat-resistant power cable. Due to the superb stability of fluoroplastic, our product features stable electrical performance, and it is also resistance to acid, alkali, oil, corrosion, water, aging, corrosive gas, high temperature, etc.

Teflon (PTFE) and FEP (FluorEthylenePropylene) are very similar in composition of fluoropolymers PTFE (PolyTetraFluoroEthylene) and PFA (PerFluoroAlkoxy polymer resin). FEP and PFA both share PTFE’s useful properties of low friction and non-reactivity but are more easily formable.

FEP is softer than PTFE and melts at 260°C; it is highly transparent and resistant to sunlight. Thermally, FEP stands out from PTFE and PFA by having a melting point of 260°C, around forty degrees lower than PFA and lower again than PTFE.

Thus FEP and Teflon are ideal insulation materials for wire and cables where the cable is exposed to environment:

Resistant to Fire
Chemicals, Acids
Sunlight
Moisture
Corona
High Voltage
Temperature range -65°C to 220°C
Applicable standards JSS 51034 and MIL 16878-D

Electrically, PTFE, FEP and PFA have identical dielectric constants, but FEP’s dielectric strength is only surpassed by PFA. We are offering single core wires and multi-core cables in user specific design.

Standard wire cross sections in mm²

Cross section in mm2: Any cross section and colours are available for single core wire and multi core cables: E.g. 0.034, 0.0507, 0.0568, 0.0806, 0.0887, 0.1282, 0.1409, 0.154, 0.2047, 0.227, 0.2407, 0.3243, 0.3547, 0.382, 0.5168, 0.563, 0.6162, 0.8969, 0.9627, 1.2293, 1.2, 1.5272, 1.9412, 1.8886, 2.3864, 3.0848, 2.9742, 3.7287, 4.7397, 6.3015, 8.6054, 13.5889

2. Related Names for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

Fluroplastic Insulated Heat Resistant Power Cable | FEP|PFA Teflon Insulated Heat Resistant Power Cable | Heat Resistant Power Cable | High Temperature Power Cable

3. Structure for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

FEP PFA Fluoroplastics insulated heat-resistant power cable

4. Application Properties for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation
1. Rated voltage U0/U: 0.6/1kV AC
2. Max. working temperature: 200℃ for FEP (F46), and 260℃ for PFA.
3. Min. ambient temperature for working: -60℃ for fixed fluoroplastic or silicon rubber sheath, and -15℃ for the non-fixed laying
4. Ambient temperature for laying: ≥0℃ (≥-25℃ for fluoroplastic, silicon rubber and NBR sheathed cables)
5. Min. bending radius: 15 times of overall diameter for single core FEP PFA Teflon Fluoroplastic insulated power cable type, and 10 times of overall diameter for multi-core FEP PFA Teflon Fluoroplastic insulated power cable type.

5. Picture Reference for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

6. Model Explanation for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

Model	Descriptions	Working Temperature (℃)
FF46	FEP PFA Teflon Fluoroplastics insulated and sheathed power cable	-60~200
FF46P	FEP PFA Teflon Fluoroplastics insulated and sheathed, copper braid shielded power cable	-60~200
ZR-F46(FV)	FEP PFA Teflon Fluoroplatics insulated and flame-retardant PVC sheathed power cable	-40~105
YGC-F46(FG)	FEP PFA Teflo Fluoroplastics insulated and silicon rubber sheathed power cable	-60~180
YVF-F46	FEP PFA Teflon Fluoroplastics insulated and flame-retardant NBR PVC sheathed power cable	-60~105

Note: If the letter "R" is added to the model name, it means that this is soft cable. In addition, the copper core can be coated with tin.

7. Code Explanation for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation

Code	Meaning for FEP\|PFA\|PTFE\|Teflon\|Fluoroplastics Insulated High Temperature Power Cable
Series Code	Omitted
F (F46)	FEP (F46)
VF	NBR
G	Silicon rubber
ZR (V)	Flame-retardant PVC (70℃, 90℃, 105℃)
22	Steel tape armored and PVC sheathed outside
32	Thin steel wire armored and PVC sheathed outside
P	Copper braid shield
R	Multi-strand soft conductor

8. Standards for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation
Q/321011KLA209-2009

9. Qualification for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation
1. The DC resistance of this FEP PFA Teflon heat-resistant power cable is in accordance with GB 3956.
2. The insulation resistivity at 20℃ is higher than 500MΩ•km.
3. The end product is detected by the voltage withstand test, and it should not be damaged during the 5-minute-testing. Additionally, the test voltage is 3.5kV AC, and the frequency is 50Hz.

10. Applications for Heat Resistant Electric Power Cable with Teflon | PTFE | FEP | PFA | Fluoroplastic Insulation
This FEP PFA Teflon fluoroplastics insulated power cable is used as the fixed power transmission and distribution line, or linking wire for motor. It offers stable electrical performance under high temperature, and it also shows the advantages of large current carrying ability as well as long lifespan. As a result, this product is widely accepted in the metallurgy, electrical industry, petrochemical field, large construction, automobile manufacturing and others.

With Yiteng, all cables are produced by strict inspection and testing:

1). Raw Material: Copper, Aluminium, PVC, PE and XLPE granules and all other materials for producing cables are all inspected carefully automatically. Only the qualified will be applied into cable production, the disqualified will be rejected.

2). Production Procedure: Cables in Yiteng are produced by advanced cable production machines.

3). Testing: Cables in Yiteng will not be packed until they are tested totally qualified. Cable Testing Machines includes Online Core Shift Detection Device, Tension Tester, Aging Test Chamber, Experimental Apparatus of Combustion, Insulation Resistance Tester and etc…

Packaging & Shipping

4). Package and Shippment:

With Yiteng Cable,

1. Cables are packed in standard export drums or other ways per customer's requirement;

2. Cables are handled and shipped carefully to ensure perfect package upon customer's receipt.

Our Services

Yiteng Cable Technology Hebei Co., Ltd. sincerely ensure every present and potential customers and friends that we will always:

1. Make A Response with 12 Hours to All Custoemers;

2. ISO9001, ISO14001, CCC Certificates for Factory and Cable Products;

3. Factory Direct Supply and OEM Service of Cable Products;

4. Yiteng Cable will not only serve goods before selling, but will be better and better during sales and after sales;

5. All Customers' Information will be kept confidential without permission.

6. Yiteng Cable can also help customers to seek for and inspect goods and factories of other categories once our cable deal is stable.

Company Information

Yiteng Cable Technology Hebei Co.,Ltd. is a specialized manufacturer of cables.

Welcome Your Visit! Hope to Get in Touch with You!
Cable Factory Name	Yiteng Cable Technology Hebei Co., Ltd.
Factory Established in	Year 1994, 20 Years’ Experience of Producing kinds of Cables
Factory Location	Jiajiakou Town, Ningjin County, Hebei, China
Export Office Location	No. 228 Jianshe North Street, Shijiazhuang, Hebei, China
Cable Products Type	Customized Cables per Requirement
	Bare Aluminum Conductor AAC AAAC ACAR ACSR
	Overhead Aluminum Aerial Bundle Cable (ABC Cable)
	Aluminum Alloy Cable with/ without Armor and Interlock
	Shielded/ Screened Control Cable
	Computer Shielded Cable
	Flexible Rubber Cable
	Mining Cable, Flexible Rubber Mining Cable, PVC and XLPE Insulated Power Mining Cable
	High Temperature Cable, Silicone Rubber Insulated Cable, Teflon Insulated Cable
	Fire Resistant/ Flame Retardant Power Cable
	Low Voltage Power Cable and Medium Voltage Power Cable with or without Armour ( Armour Type: Steel Tape or Steel Wire)

FAQ

Questions and Answers!

Experts of Yiteng Cable will always wait to answer all your questions!

1. When was Yiteng Cable founded?

Our factory was first establlished in Year 1994 and then it changed names several times.

2. What kinds of cables does Yiteng Cable produce?

1). Overhead Line Cables:

Bare Conductor: AAC, AAAC, ACAR, ACSR, etc

ABC Cable( Aerial Bundle Cable): Solid Core, Duplex, Triplex, Quadruplex Service Drop, etc;

2). Alluminum Alloy Cable;

3). Shield Cable;

4). Control Cable;

5). Power Cable;

6). Special Cable in accordance with Customer's specific requirement.

3. What certificates does Yiteng Cable has been approved?

Yiteng Cable has been approved successfully by CCC, ISO9001 and ISO14001, SGS, etc;

4. What's the Minimum Order Quantity?

Yiteng Cable accepts small trial orders to facilitate customer's inspection and trial of our cable.

5. Can customers audit Yiteng Cable?

Sure, Yiteng Cable alwlays welcome customers, home and aborad, come and audit the factory before cooperation. Cables in Yiteng can also be inspected by customers personally or the third party every time before shippment.

Experts of Yiteng Cable will always wait to answer all your questions!

We hope to get in touch with you!