galvanized steel coil sgcc sgcd sghc
USD $600 - $800 /Ton
Min.Order:25 Tons
Hebei Guanhong Trading Co., Ltd.
1, Thickness: 0.23mm---1.2mm.
2, Width: 900mm---1250mm. width tolerance:+/-0.02mm
3, Zinc coating weigh: 60g/m2--290g/m2
Our product is good quality with best price and service, prompt shipment:
Standard: SPHC SPHD SPHE or as per buyes’s sepcification SGCC / DX51D+Z JIS
Thickness range: 0.23mm-1.2mm*1250mm
Width: 900—1250mm /914mm, 1000mm, 1010mm, 1200mm, 1250mm
Mass of Zinc Coating: 60-80-100-120-270-290g/m2
Waterproof prime packing: The export packing contains waterproof pillar, can send 20ft container or bulk Guanhong galvanized sheet is mainly used in architecture, light industry, automobile, agriculture,animal husbandry,fishery, and commerce, etc. in architecture industry , it is mainly used to manufacture roof panel and roof grate of anti-corrosive industrial and civil building, in light industry, it is used to make shell of household electrical appliance, chimney for civil use, kitchenware,etc, in automobile industry, it is used to make anti-corrosive parts of car, in agriculture animal husbandry, and fishery, it is used to make freezing processing tools for grain storage & transport, meat, and sea food; in commerce, it is used as storage, transport and packaging tools of materials.
Surface treatment of hot-dip galvanized sheet(coil)
L | Chromic acid passivation |
Y | Basting |
LY | Chromic acid passivation and basting |
GZ | Finishing of finishing machine |
Surface structure:
Surface structure | Characteristics | Application |
Normal spangle (Z) | Under the common conditions, the galvanized zinc makes spangle after condensation. | Common usage |
Finishing spangle (G) | Finish the galvanized sheet by finishing machine, and level off the spangles on the galvanized sheet. | Used as base lamina of color coated sheet. |
Processing property | Yield stress | Tensile strength | Tensile stretch % | 180o cold bending | Processing property | Yield stress | Tensile strength | Tensile stretch % | 180o cold bending |
Common PV | — | 270-500 | — | d=0, in good condition, non-dezincing. | Deep pressing SC | — | 270-380 | ≥30 | d=0, in good condition, non-dezincing. |
Mechanical articulation JY | — | 270-500 | — | d=0, in good condition, non-dezincing. | Ultra-deep pressing SC | — | 270-380 | ≥30 | d=0, in good condition, non-dezincing. |
Structure JG | ≥240 | ≥370 | ≥18 | d=0, in good condition, non-dezincing. | — | — | — | — | — |