FTTH/FTTB 1U 8 PON GPON OLT High-Performance Cabinet OLT
USD $60 - $95 /Piece
Min.Order:10 Pieces
Shenzhen Bton Weiye Technology Co., Ltd.
1.4PON ports (1.25G)
2.8 GE Combo port (electronic ports and optical ports options)
3.1 console port
BT-M604T-A/M608T-A is designed for chassis OLT device which provides 4 /8 downlink 1000M PON ports, 8 uplink GE Combo ports by BTON. The height is only 1U for easy installation and space saving. Each PON supports up to 64 terminals, the whole device supports up to 256/512 ONUs under full configuration. M604T-A /M608T-A adopts advanced technology to support SLA and DBA to keep strong function on the Ethernet and QoS features. It is applied for commercial and grid network digital management to provide perfect, smart, strong, advanced, professional solutions for “automatic distribution” and “electricity information collection” in the implemented project for the national grid.
Product Features:
Carrier-class stability and network resiliency
Adopt large-scale NGB operation system with intellectual property rights in the global carrier network
Support PON fiber redundancy protection and device redundancy protection protocol
Support rich security features to protect the users, devices and network.
Dual power supply input and power redundancy
All PON and GE ports provide L2/L3 full-line speed without losing packets
Full PON service
Each PON support 1:64 splitting ratio ( The maximum quantity of 64 ONU)
Hot plug PON fibber module design, the farthest 20Km transmission distance
Support 128 bits triple churning function to ensure the confidential for the data transmission
Support dynamic bandwidth distribution DBA algorithm
Powerful OAM
Use packet forwarding based on hardware to be effective for feature detection and packet filtering
Support auto protection and user blocking for ARP attack based on MAC address
Support all kinds of protecting DDoS, CPU over-current and VRRP etc
Support BFD, FlexLink, auto linkage aggregation and Ethernet Ring protection
Product Specification:
Item | <![if !supportLists]><![endif]>BT-M604T-A | BT-M608T-A |
Switching capacity | 32Gbps | |
Throughput(IPv4/IPv6) | 9.5Mpps | |
Service port | 4/8*PON,8*GE Combo | |
Redundancy design | Dual power supply, support AC input,dual DC input and AC+DC input | |
Power supply | AC:90~260V,47~63Hz DC:-36V~-72V | |
Power consumption | ≤40W | |
Outline dimensions (mm) (W*D*H) | 442mm×44mm×315mm | |
Weight (in maximum configuration) | ≤7kg | |
Environmental parameter | Working temperature:0°C~40°C Storage temperature:-40°C~70°C Relative humidity:10%~90%,no condensing |
Business Features:
Item | BT-M604T-A | BT-M608T-A | |
PON features
| IEEE 802.3ah EPON,China telecom/Unicom GEPON standard 20Km for single fibber,Access 64 terminals for single fibber PON Uplink and downlink triple churning encrypted function ONU terminal legitimacy certification, report illegal ONU registration DBA algorithm Standard OAM and extended OAM ONU batch software upgrade, fixed time upgrade, real time upgrade PON transmit and inspect receiving optical power | ||
L2 features | MAC | MAC Black Hole,Port MAC Limit,8K MAC address | |
VLAN | 4K VLAN entries Port-based/MAC-based/IP subnet-based VLAN Port-based QinQ and Selective QinQ (StackVLAN) VLAN Swap and VLAN Remark and VLAN Translate GVRP Based on ONU service flow VLAN add, delete, replace | ||
Spanning tree protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP) ONU remote loop detecting alarm | ||
Port | Bi-directional bandwidth control Static link aggregation and LACP(Link Aggregation Control Protocol) Port mirroring and traffic mirroring | ||
L3 features | Supporting static route | ||
Security features | User security | Anti-ARP-spoofing Anti-ARP-flooding IP Source Guard create IP+VLAN+MAC+Port binding Port Isolation MAC address binds to port and port MAC address filtration IEEE 802.1x and AAA/Radius authentication | |
Device security | Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack SSHv2 Secure Shell SNMP v3 encrypted management Security IP login through Telnet Hierarchical management and password protection of users | ||
Network security | User-based MAC and ARP traffic examination Restrict ARP traffic of each user and force-out user with abnormal ARP traffic Dynamic ARP table-based binding Supports IP+VLAN+MAC+Port binding L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port URPF to prevent IP address counterfeit and attack DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF,RIPv2 and BGPv4 packets and MD5 cryptograph authentication | ||
Service features | ACL | Standard and extended ACL Time Range ACL Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame. System supports concurrent identification at most 50 service traffic Support packet filtration of L2~L7 even deep to 80 bytes of IP packet head | |
QoS | Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark CAR(Committed Access Rate),Traffic Shaping and flow statistics Packet mirror and redirection of interface and self-defined flow Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. Congestion avoid mechanism,including Tail-Drop and WRED | ||
IPv6 | SA/DA Classification,MLD Snooping | ||
Multicast | IGMPv1/v2/v3,IGMPv1/v2/v3 Snooping,IGMP Filter MVR and cross VLAN multicast copy,IGMP Fast leave IGMP Proxy,PIM-SM/PIM-DM/PIM-SSM PIM-SMv6,PIM-DMv6,PIM-SSMv6 MLDv2/MLDv2 Snooping | ||
Reliability | Loop protection | EAPS and GERP (recover-time <50ms),Loopback-detection | |
Link protection | FlexLink (recover-time <50ms),RSTP/MSTP (recover-time <1s) LACP (recover-time <10ms),BFD | ||
Device protection | VRRP host backup Double fault-tolerant backup of host program and configuration files PON card/fan hot-swappable 1+1 power hot backup | ||
Maintenance | Network maintenance | Telnet-based statistics,RFC3176 sFlow LLDP,802.3ah Ethernet OAM RFC 3164 BSD syslog Protocol Ping and Traceroute | |
Device management | Command-line interface(CLI), Console, Telnet and WEB configuration System configuration with SNMPv1/v2/v3 RMON (Remote Monitoring)1/2/3/9 groups of MIB NTP(Network Time Protocol) |
Product name | Product description |
BT-M604T-A | Cassette OLT (4 downlink 1000M PON ports, 8 uplink GE Combo ports) |
BT-M608T-A | Cassette OLT (8 downlink 1000M PON ports, 8 uplink GE Combo ports) |
Shenzhen B&TON Technology Co., Ltd is one of the powerful and high-tech companies specialized in researching, manufacturing and marketing of optical and fiber communication technologies. Our major products are media converter,Fiber Switch, digital video optical transmission systems and Optical Transceiver Modules, Patch cords
1. Do you accept OEM, such as: print our LOGO?
Yes, OEM order is welcome, Customized Logo is available.
2. What's the method of Payment?
TT, Western Union, Paypal, LC, Escrew.
100% TT in advance.
30% TT Deposit, 70% balance before shipment.
3. What is the delivery time?
Sample: 2 days
Order: Normal 3~7 days
Mass production: It depends on the quantity and the season when you order. Please contact Jessica to ask the lead time.
4. What's the method of shipment?
The goods will be sent by International express, such as DHL/Fedex. It takes 3~7 days
5. How Can I get a sample to check your quality?
After confirm the price, Please contact the sales(Jessica), she will arrange it for you.
6. How to order?
1) First Please contact the Sales(Jessica) to inquiry the exactly product you need;
2) After confirm the price and quantity, Then Jessica will send you Proforma Invoice(PI);
3) When you receive the PI, please make the payment by TT/Paypal;
4) After we confirm the payment, Jessica will arrange the production;
5) When the goods prepared, Jessica will send it by DHL and send you a tracking No.;
6) Last, you can track the goods on website and receive when it arrived.
7. What's the Warranty?
All the Fiber media converter have been through functional test and aging test. We provide 3 years warranty for all the media converter from the date of shipment.
If you have interest, Call me for the price! Or add online skype: Sophinesnow2005