Geothermal Heat Pump, buy Commercial water to water heat pump water heater on China Suppliers Mobile

Product Details

Commercial water to water heat pump water heater

Geothermal/Ground Source Heat Pump /water to water heat pump

Blueway 2013 new ground source heat pump allows you to combine a water based heating system with a modern heat producing device. It saves energy consumption up to 75% compared with electric heaters.

The ultra quiet design makes the whole compressor and heat pump system on a floating plate, leads to a compete isolation from the heat pump bottom, and reduce vibration and noise at the most extent. That is to say, Blueway new brine to water heat pump is ideal for indoor installation.

Products Features

1) Base frame and external panels made of galvanized powder coated steel

2) Compact structure and good demount ability

3) Reliable compressor with environment friendly refrigerant

4) Intelligent controller with possibility of remote control available

5) Wide rang of capacity selection, from 6KW to 50KW.

6) Stable water flow switch available

7) Multi-functional products protection. High pressure and low pressure, overheating, overload, anti-freezing,

8) The units can work stable all year around.

Products specification:

Specification-Water Source Heat Pump
TECHNICAL DATA			DWW-06HA	DWW-08HA	DWW-10HA	DWW-13HA	DWW-16HA/3	DWW-20HA/3	DWW-30HA/3
Heating	Nominal capacity	KW	7.2	9.55	10.74	14.3	17.5	23.4	33.2
	Power input	KW	1.42	1.9	2.16	2.75	3.38	4.46	6.38
	COP	W/W	5.08	5.03	4.97	5.2	5.18	5.25	5.2
Cooling	Nominal capacity	KW	6.5	7.55	8.45	12.7	16.7	20	30.4
	Power input	KW	1.58	1.88	2.16	2.98	3.98	4.65	7.1
	EER	W/W	4.12	4.01	3.91	4.26	4.20	4.30	4.28
DHW	Nominal capacity	KW	6.35	8.32	9.5	12.5	15.4	20.6	37.6
	Power input	KW	1.69	2.26	2.56	3.25	4.05	5.28	11.12
	COP	W/W	3.76	3.68	3.71	3.85	3.8	3.9	4.25
Power supply		V/Ph/Hz	220-240/1/50				380-415/3/50
Max. water-outlet temperature		°C	58
Refrigerant type			R410A
Compressor type			Rotary			Scroll
Heat exchangers			Coaxial Heat Exchanger			Plate Heat Exchanger
Dimensions (Net)	HxWxD	mm	982x606x634	982x606x634	982x606x634	982x606x634	982x606x634	982x910x634	982x910x634
Dimensions (Packing)	HxWxD	mm	1110x715x715	1110x715x715	1110x715x715	1110x715x715	1110x715x715	1110x1020x715	1110x1020x715
Net weight		kg	130	138	140	135	138	150	170
Gross weight		kg	135	143	145	140	143	160	180
Noise level		dB(A)	47	47	47	48	48	53	56
Container loading		20' GP (units)	48	48	48	48	48	48	48
		40' GP (units)	96	96	96	96	96	96	96
		40' HQ (units)	96	96	96	96	96	96	96
NOTES: Capacities and power inputs based on the following conditions: - Cooling: Water source inlet/outlet temperature 30°C/35°C; User side inlet/outlet temperature 12°C/7°C. - Heating: Water source inlet temperature 10°C; User side inlet/outlet temperature 30°C/35°C. - Domestic Hot Water: Water source inlet temperature 10°C; Water temperature in the tank 40°C (Tank not included). - The flow rate obtained during the test at standard rating conditions in cooling mode is used.