Product Details

HOT DIPPED GALVANIZED HAREWARE CLOTH

HOT DIPPED GALVANIZED AFTER WIRE MESH

Hardware Cloth is constructed of the lightest wire diameter which a given mesh can be produced with good stability.

The larger openings including 2, 3 and 4 Mesh are typically welded while the 8 Mesh is woven. After welding or weaving, Industrial Hardware Grades are Hot-Dip-Galvanized to provide

protection against rust.

WiresPer Linear inch	Hardware Cloth Opening		Wire Gauge	Wire Diameter After Galvanizing		Percent Open Area
WiresPer Linear inch	Inches	M.M.	#	Inches	M.M.	Percent Open Area
2 mesh	0.458”	11.63	19	0.0420”	1.07	83.9%
3 mesh	0.301”	7.64	21	0.0327”	0.83	81.3%
4 mesh	0.223”	5.66	23	0.0268”	0.68	79.7%
8 mesh	0.107”	2.71	27	0.0183”	0.46	72.9%

Mesh	Center-Center Wire Spacing	Standard 100’ Long Roll Widths
2 mesh	1/2”X1/2”	24”	30”	36”	48”	60”	72”
3 mesh	1/3”X1/3”	24”	30”	36”	48”	60”	72”
4 mesh	1/4”X1/4”	24”	30”	36”	48”	60”	72”
8 mesh	1/8”X1/8”	24”	30”	36”	48”

Custom Widths: Slitting is Available Although Not Recommended

Welded hardware cloth:

Woven hardware cloth:

Product pictures:

Contact information: