Product Details

1, SNS Active Protection System

(1) WICCO System

The WICCO System is the first generation of Slope stabilization system, mainly consists of Diamond Wire Rope Net. For the early application, The WICCO System technology has quite mature. And The System is extensive application in recent years.

Components

The WICCO system consists of the diamond wire rope net, grid net, anchors, anchor bearing plate , border and seaming ropes and net connection elements.

Standard Specification:

Diamond wire rope net: Rope wire diameter: 8mm

Hole size: 300mm (+/- 5%)

Roll size: 4m x 4m, 4.5m x 4.5m etc.

Grid net:: Wire diameter: 2.0mm or 2.2mm

Hole size: 50mm*50mm

Roll size: 2m*20m

Anchors: Deformed steel bar anchor diameter: 25mm or 28mm

Length:2m -5m

Anchor bearing plate: 320mm x 170/180mm

Rope: Border rope diameter: 12mm or 16mm

Seaming rope diameter: 8mm

(2) NACCO System

The NACCO System is the same as WICCO System, the only difference is that In NACCO System, there have a layer of plastic on the outside of the rope wire.

(3) TECCO System

The TECCO steel wire mesh is made by 3mm high-tensile steel wire. And with anchors the TECCO steel wire mesh covers over the slope tensioning and firmly.

Components

The TECCO system consists of the TECCO steel wire mesh, anchors, anchor bearing plate , border and suture ropes and net connection elements.

Standard Specification:

TECCO steel wire mesh: wire diameter::3mm,

Hole Inscribed circle diameter: 65mm (+/- 5%)

Roll size: 3.3m x 10/20/30m

Anchors: Deformed steel bar anchor diameter: 25mm or 28mm

Length:2m -5m

Anchor bearing plate: 320mm x 170/180mm

Rope: Border rope diameter: 12mm or 16mm

Seaming rope diameter: 8mm

Benefits:

Compared with other active protection system:

Only 60%-80% cost compare with the traditional wire rope system.

Fast and easy installation

(4) SPIDER System

The SPIDER spiral rope net made by high tensile 3 mm steel wire, which is the mainly component of the SPIDER System. SPIDER net with a layer of grid net stabilizes large areas of rock with anchors and boundary ropes. Unstable rocks are wrapped with a layer of spiral net and a layer of grid net and anchored all around with boundary ropes.

Components

The SPIDER system consists of the SPIDER spiral rope net, grid net, anchors, anchor bearing plate , border and suture ropes and net connection elements.

Standard Specification:

SPIDER spiral rope net: Rope wire structure:3*3mm,

Hole Inscribed circle diameter: 250mm (+/- 5%)

Roll size: 3.5m x 5/10m

Grid net:: Wire diameter: 2.0mm or 2.2mm

Hole size: 50mm*50mm

Roll size: 2m*20m

Anchors: Deformed steel bar anchor diameter: 25mm or 28mm

Length:2m -5m

Anchor bearing plate: 320mm x 170/180mm

Rope: Border rope diameter: 12mm or 16mm

Seaming rope diameter: 8mm

2, SNS Passive Protection System

(1) The Passive SNS shielding system

The Passive SNS shielding system is also called stone blocking mesh, made by flexible steel wire rope netting installed in the slopes to stop the falling rocks . It can also be installed in the mud-rock flow area to form the flexible fencing dam to stop the huge solid pellets in the flow.

Standard Specification:

Diamond wire rope net: Rope wire diameter: 8mm

Hole size: 200mm (+/- 5%)

Roll size: 4m x 5m, etc.

Grid net:: Wire diameter: 2.0mm or 2.2mm

Hole size: 50mm*50mm

Roll size: 2m*20m

Anchors: Steel Rope anchor diameter: 16mm

Length:2x2m

Rope: Border rope diameter: 12mm or 16mm

Seaming rope diameter: 8mm

Other Components: Steel Column, rope support base, vacuum ring

(2)Ring Network System

Ring network system is a passive protection system, a special branch, which has a passive protection system than the average strength of a higher character. The same applies to construction facilities in the buffer zone next to the mountains and little hills, the rock fall, flying stones, avalanches, landslides blocked the building facilities, building facilities to avoid the disasters on the destruction.

Common ring network structure configuration and protection features (Consistent with Railway Industry Standard: TB / T 3089-2004 and "The People's Republic of China Communication Industry Standard: JT/T528-2004)
Model	Grid	Configurations	Main protection
RX I-025 (Ring Network)	R5/3/300	Supported by steel columns + rope + system + suture anchor rope	Wit RX-025
RX I-050 (Ring Network)	R7/3/300	With RX I-025	RX-050
RX I-075 (common-type ring network)	R7/3/300	With RX-025	RX-075
RX I-100 (Ring Network)	R9/3/300	With the RX-025	Within the intercept falling rock impact can 1000kj
RX I-150 (Ring Network)	R12/3/300	With RX-025	Within the intercept falling rock impact can 1500kj
RX I-200 (Ring Network)	R19/3/300	With RX-025	Within the intercept falling rock impact can 2000kj
Note: 1, the table models behind the figures represent the ring fence of the energy absorption capacity; such as "050" indicates that the maximum energy absorption capacity of the system 500kj, "150" indicates that the system maximum energy absorption capacity of 1500kj, and so on; 2, Ring network for more than flexible protection system "major components and characteristics of the" If your design does not fully consistent with the Department, the company can design according to your processing and manufacturing requirements; 3, product quality standards are in line with "The People's Republic of China Railway Industry Standard: TB / T 3089-2004 "and" The People's Republic of China Communication Industry Standard JT/T528-2004 "