prices for 1.0mm hdpe sheets liner

1) Thickness : 0.15mm - 4.0mm .

2) Width : Within 8 m (1m-8m) .
3) Length : 50m-100m/roll (as request) .
4) Material : HDPE,( LDPE, LLDPE, PVC, EVA ).
5) Color : Black , white , red , blue , or as request .
6) Optional surface : Textued(one or two side) or smooth surface .
7) The biggest pond liner manufacturer/factory in China for many years .

 HDPE geomembrane is based on the material of plastic film, relative to the HDPE geomembrane has better applied and suppleness, is to update the generation of soil seepage control material. LDPE geomembrane and geotextile glue them into a soil anti-seepage material it has corrosion resistance, good low temperature resistance, light quality, laceration resistant ability and other characteristics; The characteristics of its low cost, high quality and low price is not matched by other same category geotechnical seepage control material.

Features: 1) Can bear chemical erosion.

2) A wider using temperature range and a longer using life. Application: It can be widely used in areas of garbage burying, waste disposal, tail minerals storage and underground construction projects. Technical craft: The HDPE geo-membrane is produced by a method of three layer co-extrusion model. The raw material is processed at 200 by fusing and coextrusion, whose basic properties are kept during the producing process.

Technical specifications of HDPE geomembrane for GH-2 standards:

a) Density ≥ 0.94g/m²

b) Tensile Strength ≥25Mpa

c) Elongation at Break ≥ 550%

d) Right-angled Tear ≥ 110N/mm

e.)Puncture Strength ≥ 550N

f.) Permeability Coefficient ≤1.0xe-13g.cm/(cm2.S.Pa)

g.) -70oC Low Temperature Impact Brittle Property: good.

h.) Chemical Resistance: at 80oC, marinated in 5g/L Nacl for a long time, it will not erode or swell.

 For ASTM standard

Density: ≥ 0,94 g/cm³ - ASTM D 792
Tear Resistance: 275 (250) N - ASTM D 1004
UV Resistance = HP-OIT retained after 1,600 hours ≥ 50% - ASTM D 5885 (GRI-GM 11)
Surface: Double-sided smooth
Stress Crack Resistance (NCTL): ≥ 336 h - ASTM D 5397 (Appendix)
Puncture Ressitance: 690 (640) N - ASTM D 4833
Carbone Black Content: 2.0 - 3.0 % - ASTM D 1603

Application

1.Environmental protection, sanitation (such as landfill, waste water treatment, toxic and 
harmful chemicals disposal sites, storage of dangerous goods, industrial waste, construction 
and demolition waste, etc.)
2.Water (such as impervious, stop water loss, and reinforcing of lakes,and the impervious, 
slope protection, etc.)
3.Municipal projects (underground subway, engineering underground and reservoirs on the roof, 
and the park on the roof, the lining in the sewage pipes, etc)
4.Garden (artificial lakes, ponds, the lining of tank in golf course, slope protection, etc)
5.petrochemical (chemical plants, oil refineries, oil tank of fill stations, chemical reactions pond, 
the lining of settling basin, second lining, etc)
6.Mining (washing and selecting pool, heap pool, ashery, dissolving pool, settling basin, stock 
dump, lining of tailing pond, etc)
7.Agriculture (reservoirs, drinking water tank, water storage pond, irrigation systems)
8.Aquaculture (fish ponds, the lining of breeding shrimp tank, slope protection of sea slug tank)
9.Salt industry (crystallization pond, thatch of salt pond, alt membrane, plastic thatch of salt pond).