Product Details

1.Vibration detector alarm PA-971

1.Sensitivity continuously adjustable
2.LED ON / OFF adjustable
3. Alarm delay selectable
4.RFI ( 20V / M-1GHz)
5.Using SMT process, anti-RFI, EMI interference

Technical parameters

Induction	Photoelectric sensors
Operating voltage	9-16VDC
Operating Current	15mA
Alarm contact	NC, 12VDC, 100mA max
Tamper contacts	NC, 12VDC, 100mA max
Alarm Time	2.0s mi
Warm-up time	1 minutes
RFI characteristics	25V / m at 10Mhz to 1Ghz
Operating temperature	-5 ~ 55 º C
Storage Temperature	-30 ~ 60 º C
Dimensions	26 × 85 × 24mm
Installation	Unlimited
Mounting height	Unlimited

Mounting and fixing

Unpack and install combination

1, removal of the panel, insert the screw with a small community paper knife or screwdriver to cover the gap next (see Figure 1), gently pry the cover screws, loosen the screw, and then separated from the bottom surface of the lid (See Figure 2).

2, Connection: 12V - Power; TAMPER - Tamper / scissors; ALARM - signal lines.

3, Installation: Remove the bottom case RV971A detectors, fixed with screws to lay eyes on the ATM machine, or with a spring loaded in the "AB glue" to fix to the ATM machine.