Specifications

1.Aluminum Electrolytic Capacitor
2.Good insulation
3.High performance
4.Good sealing and Long life
5.High strength

Features

Aluminum Case, Mositure and Oil Resistant Voltages from 110V AC to 330V AC UL Recognized Capacitors.

 

General Specifications

Operating Temperatrure:-40 to +70 °C

Voltage Range :110~330V AC

Capacitance Range :21~1280μF

Capacitance Tolerance:-0%~+20%

Operating Frequency:50~60Hz

Case Size:8 Standard Size from

1.437 " x2.750 "~2.562 " x4.375"

Termination:

1/ 4"Quick Disconnect Terminals(Std.)

Performance Specification:

Meets Requirements of EIA-463-A

Starting and running of single phase motors in

alternating current usage.

 

Product Description

This kind of the capacitors are developed and researched according to standard of American Electronics Association(ANSI/EIA-463). The external case of the capacitor is made of bakelite plasticized that its character are not only good insulating resistance and strong resistance damaged bus also protecting electro-liquid as good sealed feature. It is popular used for the super AC application as good life, higher degree of reliability and stability.

 

Item	Item
Operating temperature range	-25~+55°C
Rated voltage range	110~330VAC
Nominal capacitance range	25-1000μF
(20°C,120Hz) Nominal capacitance tolerance	±10%,±15%,±20%
Dissipation factor(20°C,120Hz)	Tgδ≤0.15
Surge voltage	Capacitor leads to the connection between the media should be able to withstand the test voltage 1.2Un lasted 2S, testing should not occur during the breakdown flashover
Load life	Un less than 160V power capacitors by 1S, no electricity 1min test for Un ≥ 160V capacitors , according to the 1S -energized power and 2min test , Test duration 500h, including power and unreasonable time , test time from power Container since the beginning of the applied voltage , test voltage should be 0.85 times the maximum voltage , The maximum allowable capacitance change of 15 % of initial value .
Insulation level test for capacitor	Capacitor between terminals and case insulation should withstand ≥ 2KV -frequency test Voltage , the time for 10S, breakdown or flashover should occur
Surge voltage	1.2 times the working voltage applied for 2 seconds , not breakdown or flashover .
Circuit and housing to withstand the voltage between	Failure, can withstand 10 seconds at 2000 volts , not breakdown or flashover