Led neon flex stripe series:

When you find my webpage and you will feel glad that you can say farewell to high cost Advertise board and complicated installation and constant  maintainment and even discontented design. Our annoucement is do it yourself, make your real signs as you wish! 

With our materials, you can be professional as well. Please contact us for more :-)

Advice:

1. For long meters designs , high power 220~240V or 110~120V is best choose to install

    where people is not touchable hight.
2. Backgroud for the sideeffect of brightness, the professional version is ideal choice! Pure

     light!
3. Backgroud application for outline merely, the general version or economical version is good

     enough!
4. For small sign size, the ultrathin or mini neon flex strip is your answer
5. To make daytime remarkable as well, the color cover jecket is the best one!
6. In Bars and club where people easy to touch, we suggest to use low power version although

     the thick PVC is isolation
7. The neon Flex body can reach IP 65, but the connectors are not, If you use at outdoor or

    Swimming poor , please keep the connection in well protection!
8. Rainbow or color chasing is available by our SLC1XXX,  or SLC2XXX, last three number is

    voltage, like SLC1120 or SLC1024.
9. Read carefully the user manual before you start your job!

Accessories:

*Plastic clip,Clip with four screws
*Channels: PVC channel 2m or mini Channel 5cm, 
*Aluminum channel 2m or mini Channel 5cm, 
*Male Pin                               
*X connection  X connetor +4 male pins+4 shrink tube             

*T connection  T connector +2 male pins+2 shrink tube            

*L connection  L connector +2 male pins+2 shrink tube            
*Front connector to powerA: Plug according to your country or demands + power code +

  transformer( for low power)+ AC/DC convertor +female connector + male pin+shrink tube  

*Front connector to powerB: Power code + AC/DC convertor +female connector + male

   pin+shrink tube                        

*Front connector to powerC: Power code + female connector + male pin+shrink tube 

                                                     
*Front connector to controllerSLC1XXX: Connector + power code +  +female connector + male

  pin+shrink tube                          
*Front connector to controllerSLC2XXX: Connector + power code +  +female connector + male

 pin+shrink tube                           

*Splice connector: male pin + shrink tube   

*Middle connector  2 female connectors + 2 male pin +Heat shrink tube+ costumed cable 

                                                      
*End connector:  end cap              
*Shrink tubes                                
*Glue  PVC Glue  40g/piece