Specifications

1.Electric heating element with thermosta
2. Different styles
3.Used with thermocouple
4.Can be customization

 

 About  Electric heating element with thermosta

Single knob control (turn off the heat, often open flame, temperature setting),with flame-out protection device ,restart automatically locked .

The pressure of the often open flame traffic and the main airway can be adjust .

There are two groups Air inlet and air outlet in the Side and bottom,to facilitate rapid installation in a reliable way.

 

 Scope of Application 

 

 

  Parameter Specification 

 

Operating temperature	13℃—38℃	Customization
Intake way	1/2­­---14NPT . Quick connector	Customization
Outlet way	M16×1.5 , 3/8—19NPT	Customization
Material	Aluminum alloy
Maximum intake pressure	50mbar
Exhaust pressure	3—18mbar
Voltage regulator	Without
Solenoid valve drop-away current and absorption current	80—200mA	Customization
Sealed way	Rubber seal
Thermocouple interface	M8×1.0 , M9×1.0	Customization
SUITABLE GAS	Liquefied petroleum gas, natural gas
Drive mode	Thermal expansion
Ambient Temp	0℃—80℃

 

 The picture of the  Electric heating element with thermosta

 

 

           

Usually carton packaging, or PVC bag with a label.

Specifically according to the customer to your needs,

you can use any packaging situation.

 

 

PCS/BAG	25pcs/bag
PCS/CTNS	500pcs/ctns
CTN Size	400*250*150mm
Shipping	By courier or by sea
Delivery time	5-30 da

 

                        

 

                  

 

	Thermocouple, ODS, Solenoid Valve, Thermostat

 

                              

 

                  

 

                   More details, please contact Elian.Thanks!