Electric wire rope hoist used in contruction
USD $45 - $1,000 /Set
Min.Order:1 Set
Beijing Yinhe Jinyuan Science & Technology Developing Co., Ltd.
Instruction
Hoist elevator is used more and more commonly in the construction field. This large equipment is used outside of the construction building and there is safety risk. Compared with tower cranes, gantry, mast, material hoist, it needs more indoor operating controlling. Construction workers on different floors usually get help from person in hoist elevator by beating the steel pipe attached on the wall, which is not safe and lack of position accuracy.
Now in order to manage the construction lift convenient and reasonably and to improve working efficiency, the iHomePager layer calling system is coming. This system is wireless, no need any label, easy installation, it has successfully solved the communication problem between construction workers and lift operator. It also sharply reduces the safe risk, and greatly improves the efficiency, which finally speed up the construction progress ideally.
This system uses zero electromagnetic interference wireless coding technology and it is low radiation, low power, high receiving sensitivity. Its transmitting power is less than 10% of the phone, which could fully meet the communication requirements of lifts.
System Configuration
Transmitters in each floor
The transmitter could be fixed on a position where the construction worker can press it easily. When construction work in this floor need any service, he or she just press the transmitter, and the signal will be sent to the receiver on the hoist. The transmitter ID could be set as the floor number.
Signal Receiver on the hoist
The signal receiver could be fixed on the position of the hoist where the operator can read the information easily. When the receiver get signal from the transmitter, it will show the floor number with music or with voice alert. Once the operator hears the calling information, he or she see will drive the hoist to the floor where need service.
Parameter
voltage:12V electric current:1A 3.capacity:454.support NO:1-45 temperature: -20℃-55℃ 6.receiving senbility:-105dBm 7.receiving distance: 500m open area 8.frequency:433MHZ/315MHZ 9.size:23.5cm*11.5cm*6cm 10.weight: 0.9kg |