Specifications

1.self adhesive bitumen flash tape
2.Thickness: 1.2mm, 1.5mm, 2mm
3.Width: 5cm-100cm
4.Length: 10m, 15m, 20m

self adhesive bitumen flash tape

 

Typical Uses

 

Roofs - Construction and Repair

 

· Sealing roof skirtings (upstands) and eave pieces/edge flashing to felt. 

 

· Sealing around RSJ’s, extraction vents and concrete columns and capping corrugated roof apex prior to fixing crest. 

 

· Roof cappings/repairs to damaged slates and tiles/replacing stolen lead and damaged lead flashings. 

 

Drainage System- Repairs and protection of pipework

 

· Gutter and valley linings and patch repairs. 

 

· Gutter joint repairs. 

 

· Down pipes and joint repairs/drip trays into gutters. 

 

Glazing Repairs

 

· Emergency repairs to glass/glazing bars/roof lights/vehicle maintenance. 

 

· Sealing leaks in vans, trucks, and caravans. 

 

 

Features & Benefits

 

· Instant seal/weatherproof. 

 

· Strong adhesion/multi-use. 

 

· Easy to apply. 

 

· Moulds around contours. 

lTECHNICAL DATA

Property	Data	Test Method
Thickness	1.0mm, 1.2mm, 1.5mm	-
Backing type	Aluminum foil, HDPE film	-
Adhesion to Primed Concrete	>250N	ASTM D 1000
Adhesion to Steel	> 250N	ASTM D 1000
Elongation %	> 30	BS 2782
Tension N/50mm	> 200	-
Temperature Resistance	-25°C /+90 °C	-

 

STORAGE

Store under cover, out of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12 months when stored as per recommended storage condition.

HEALTH & SAFETY

As with all bitumen products caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately