Specifications
laser scan measuring methodDrill Diameter measuring Detector(Laser gauge) Mainly used in drill bits and pieces of metal processing diameter measurements.
Drill Diameter measuring Detector (Laser gauge) is the high-accuracy measuring device that uses the laser scan to carry on Non-contact the on-line measure. Mainly used in drill bits and pieces of metal processing diameter measurements.
Brand: Mercury-tech
Model: LDM20DR
Measurement Range :0.1-20mm
Measurement accuracy: 0.0005mm
Measurement resolution: 0.0001mm
Repeatability: 0.001mm
The performance indicators:
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V ± 15% 50 - 60Hz
Operating temperature: -10 ~ 40 °C
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
Dimensions: 500mm (length) X300mm (W) X120 (H)
Remote Display Controller (Model: DDC-5), can quickly display diameter and output tolerance alarm.
Remote Display Controller (Model:DDC-5)
1. It be used to remote display and control.
2. It Can control the speed of DC motors, VVVF motor(extruder or the tractor).
3. It's suitbale for Laboratory use.
4. It will alarm,when the diameter go beyond the the set tolerance.
5. With RS485 It can connect to PLC industry controlling computer.
Dimensions: 100mm×100mm×120mm (Model:DDC-5)
Installation hole size: 90mm×90mm (Model:DDC-5)