High & Low Temperature Testing Machine: YL-1160 Low Temperature Tensile Tester

YL-1160 Low Temperature Tensile Tester

Product ID:YL-1160

Classification: High & Low Temperature Testing Machine

Brand:Yuelian

Product introduction

YL-1160 High Low Temperature Tensile Tester

Purpose

This tester is designed as improved model for environment testing, installation high temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can remove the chamber to increase use space and bring convenience when using room temperature tests.

Software Function

Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.

Specification

Capacity:	10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation)
Temp. Range:	40°C~200°C (can require to make a higher temperature)
Display:	Computer display mode
Force Resolution:	1/250,000
Force Accuracy:	≤±0.5%
Stroke Resolution:	0.005mm
Control Mode:	All computerized operation mode
Temp. Control:	PID automatic calculation, stable error
Display Accuracy:	0.1°C
Temp. Accuracy:	±1°C
Circulation System:	Fan force circulation system
Heating System:	SUS304 stainless steel heat radiation type of heater
Protection Device:	Leakage and overload protector
Chamber Material:	Inner box: SUS#304 stainless steel, outer box: advanced powder processing
Test Stroke:	300mm
Chamber Dimension:	30×30×58cm(W×D×HP)
Test Speed:	0.5~500mm/min, set by computer, with up & down fast adjustment button of grips
Force Unit Switch:	Kgf, N, Ibf, g, ton, Mpa
Stop Mode:	Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
Machine Dimension:	85×160×220cm(W×D×H)
Machine Drive:	Servo motor drive, synchronous wheel and precision ball screw drive
Power:	2KW
Machine Weight:	Approx 220kg
Power Supply:	220V 50/60HZ 30A
Standard Device:	Extension pole of grips, heat abstractor, 1 set of grips, computer software, USB computer connection wires
Optional :	Personal computer