Fire fighting extinguisher suppliers providing cheap abc chemical powder fire extinguishers

  Description

 1. fire fighting extinguisher supplies

  2.Working pressure: 14Bar;

  3.Test Pressure: 27Bar;

Example: Technical details of our dry powder fire extinguisher (M bottom):

• European standard extinguisher manufactured with ISO, CE certificate and EN3 certificate.
• Professional, well maintained, high efficient machines and equipments.
• Independent testing room with listed testing machines according to European standard.
• Professional technical team with more than 10 years’ experience in fire extinguisher industry.
• Internationalized sales team with 100% working enthusiasm.
• Well trained workers who works in factory no less than 3 years.

• Fire extinguisher is used to save life in fire. There is no any cheating on extinguisher quality.
• CE/PED certified cylinder. Minimum thickness of cylinder complies with CE/PED standard. Minimum Burst pressure is over 90Bar, some models are higher than 100bar.
• CE/PED certified valve with safety device. It complies with European standard fully. Some characteristics, such like Wall thickness, thread numbers, tightness, burst pressure etc. are higher than European standard.
• Diaphragm gauge complies to EN3-7 standard.
• En615 approved chemical powder. Not any cheating on powder quality.
• Each cylinder pass hydrostatic test at 27bar for 30 seconds in workshop.
• Each fire extinguisher pass water leakage test before leaves factory.
• Label, screen printing, carton, logo, marking could be design per your standard.
• Once we confirm your order, it means that we take responsibility to make you are happy.

A Glimpse of Our Factory

Powder Extinguishers are used widely all over the world.

Powder Extinguishers have good insulation and easy to operate.

Portable Powder Extinguishers are normally used for Fire Class A, Fire Class B and Fire Class C.

The range of our Portable Powder Extinguishers are from filling 1kg  ABC Powder to 12kg ABC Powder.

The cylinder material is DC01.

The welding place could be intermediate welding, bottom welding, upper and bottom welding.

The cylinder bottom could be made out to several models, find attached photos.

The cylinder and valve have obtained CE certificate.

We could assemble diaphragm pressure gauge or imitation diaphragm pressure gauge.

The cylinder surface is with good polyester painting RAL3000. 

Certificates