Specifications

Coil Springs Component
Stronger Hardness, Abrasion Resistant, Corrosion Resistant.
Standard Punch.

Nicaragua   standard mold spring

Material	60Si2MnA,60Si2CrA,60Si2CrV,etc
Wire diameter	5mm~80mm
Free hight	10mm~1188mm
hardness	42HRC~52HRC
Direction of coils	Right, left
Total coils	Deted By Drawing / Data.
Load Bearing Capacity	Yellow( Lightest Load )        Blue(Light Load )     Red(Medium Load ) Green(Heavy Load)       Brown(EX-Heavy Load)
Application	Excavator, digger machine, car, train, shakeout machine,Steel Plants,Railway Bogies & Wagons,,etc.
Painting and Coating	Amino paint,Synthetic Enamel Paint, Powder Coating, Phosphate, Zinc Coating etc.
Color	yellow  blue   red    green   Brown
Production method	Hot formed, cold formed
Note	The materials and specifications can be dedided by the customers.

 

 

 

Choose right compression of die spring or will distortion and reduce service life.

 

1. Can’t have gap between upper plate and die spring or will distortion and rupture.
2. When free length of die spring is 4 times to outer diameter ,please use guide rod shield to protect service life.
3. Can't use it for anything except compression .
4. Please use it on the mould.
5. When the lower plate parallelism is not well, high stress will happen and cause transformation and rupture .
6. It must be have some preloading when put die spring on the mould . preventing mould Bear impact load and cause fatigue damage.

 

 

 

 Our equipment

 

 

Our certificate

 

 

 

 Our customers