Quick Details

Product Raw Material:

Polyisoprene rubber in 100% aluminum tube: 12 g
Metal rasp (0.86 inch x1.2 inch): 1 piece

Cold rubber patch (1 inch diameter): 3 pieces

Cold rubber patch (1 inch x 1.3 inch): 3 pieces

Cold rubber patch (1.25 inch x 2 inch): 3 pieces

Rubber tubes: 2 pieces

Type:

Rubber Cement

Size:

12 g tube

Modal Number:

Bike Repair Kit

Application(s):

Glue and patch! This bike repair kit offers adhesive as well as tools for repairing bicycle tube punctures.

Regulations:

Adhesive complies with REACH standard: No DBP, No BBP, No DEHP, No DINP, No DNOP, No DIDP

Company Certificates:

ISO9001-2008 Quality Management System;
ISO14001:2004 Environmental Management System

Customization

- Custom aluminum squeeze tubes of any size with our own production equipment.
- 5-color printing on aluminum tubes with client’s logo and design.
- Latex bands of varying width from the tube base available to prevent adhesive leakage.
- Custom plastic cap of any size, color and shape with our own plastic mould equipment.
- Custom packaging of blister pack, double blister pack, paper or plastic container. Bulk pack also available.
- Standard tactile warning labels available.
- Production date printed on tube.

Physical Properties

Rubber Cement

Appearance:

Viscous liquid with semi-transparent yellow color

Main Ingredients:

n-Hexane
Synthetic Rubber
Hydrocarbon Resin

Odor:

Petroleum

Properties:

Heavy duty rubber cement
Fast curing and waterproof

Viscosity (25ºC):

4750 mpa.s

Water Solubility:

Insoluble

Boiling Point/Range:

156.2~167°F (69~75ºC)

Flash Point:

-7.06°F (-21.7ºC)

Evaporation Pressure:

155 mmHg at 68°F (20ºC)

Vapor Density (Air=1):

0.675 grams/cubic centimeter

Reactivity:

Slight

Corrosivity:

Not corrosive

Flammability:

Serious

Stability:

Stable at normal temperature and pressure under ordinary conditions of use and storage

Biodegradibililty:

Moderate

Storage:

This product is flammable and should be stored in its original packing and in a cool and dry indoor area, with temperature no higher than 104°F (40 ºC). Storage temperature should be between 41°F ( 5 ºC) and 104°F (40 ºC). Keep containers closed to avoid contamination. Do not expose material or container to source of ignition, caustics, oxidizers, heat, spark or flame. Keep away from food and drinks. Keep out of the reach of children.

Application Guidelines

Operating Temperature:

50~104°F (10~40ºC)

Method of Application:

Brush / Scraper

Instruction:

1. Remove the object that has caused slit or puncture. Locate the slit or puncture.
2. Clean the area around the puncture and keep it dry. Roughen the area with metal rasp. The area roughened should be bigger than the rubber patch you are to apply.
3. Apply a thin layer of rubber cement on the puncture with a clean and dry tool, and spread it around the area. The area should be larger than the rubber patch. Wait for at least 5 minutes for the cement to cure.
4. Take the rubber patch. Cut it into a proper round, oval or oblong shape. Peel off the backing and stick the patch onto the puncture area. Press firmly, starting from center and then all over the area.
5. Make sure the patch is firmly attached.

Cleanup:

Sprinkle absorbent compound onto spill or residue, and weep it into a plastic or metal container. Wash spill area with soap and water. Dispose in a suitable closed container in accordance with current government regulations.

Precautions:

This material is extremely flammable and will burn.
Do not swallow. Harmful or fatal if swallowed. Material may be aspirated into lungs and may cause abdominal pain and nausea.
Avoid eye contact or skin contact. Eye contact may cause severe irritation. Repeated exposure may cause skin dryness or cracking and may cause allergic reactions in some individuals. Avoid breathing vapors and use only in well-ventilated area. It is irritating to respiratory tract. Inhalation may cause drowsiness, headache, nausea and depressed CNS.

First-Aid:

Get medical aid for all cases of overexposure.
In case of skin contact, remove or take off all contaminated clothing immediately. Rinse skin with soap and plenty of water for at least 15 minutes. Consult physician if symptoms persist.
In case of eye contact, flush eye(s) cautiously with plenty of water for at least 15 minutes. Remove contact lenses if safe and easy to do. Consult physician.
In case of inhalation, remove from exposure and move to fresh air area immediately.
If swallowed, do not induce vomiting and consult physician immediately.
In case of fire, use dry chemical powder, carbon dioxide or chemical foams for extinguishing.

Shin Dorn’s Advantages

1. Factory direct sells, offering you the most competitive price!
2. 20+ years of manufacturing and exporting experience in China.
3. Products complying with US and EU standards.
4. Integrated OEM and ODM service to suit your needs.
5. Minimum order quantity negotiable under certain conditions.
6. Fast and accurate quotes.
7. Premium service!