Quick Details

Raw Material:

Rubber

Color

Patch: Black
Backing layer: Green

Size:

2"x3" (50mmx75mm),
1"x1" (25mmx25mm),
or custom size

Modal Number:

Rubber Patch

Application(s):

For repairing rubber, such as bicycle inner tube;
Used along with rubber cement.

Company Certificates:

ISO9001-2008 Quality Management System;
ISO14001:2004 Environmental Management System

Customization

- Custom patches of any size and color.
- Custom packaging of blister pack, double blister pack, paper box, plastic container, bulk pack, etc.

Instruction:

1. Remove the object that has caused the puncture.
2. Take out the inner tube.
3. Locate the puncture. Put the tube in water to look for bubbles if necessary.
4. Clean the area around the puncture and keep it dry. Then roughen the area with rasp. The area roughened should be bigger than the rubber patch you are to apply.
5. Cut the rubber patch into a round or oval shape.
6. Apply a thin layer of rubber cement on the puncture with a clean and dry tool, and spread it around the area. The area should be larger than the rubber patch.
7. Wait for at least 5 minutes for the cement to dry.
8. Take the rubber patch. Peel off the backing layer and stick the patch onto the puncture area. Press firmly, starting from center and then all over the area.
9. Make sure the patch is firmly attached before refitting the tube.