Low-inertia Standard Injector
Negotiable /Piece
Min.Order:1 Piece
Taian Xingzhou Experimental Equipment Co., Ltd.
SpecificationType | Low-inertia Standard Injector | Pintle Standard Injector | Orfice Standard Injector |
Model | ISO7440B64-20.7 | ISO7440A14-17.2 | ISO7440A54-17.2 |
Opening Pressure | 20.7+0.3Mpa | 7.2+0.3Mpa | 17.2+0.3Mpa |
Orifice Diameter | 0.40.50.60.70.8 | No | 0.40.50.60.70.8 |
Installation Length | 55mm | 55mm | 55mm |
Outer Dimension | 218×115×48mm | 193×140×40mm | 231×144×40mm |
Suitable Pump | PWPBPNPW2000P7100BQetc | IIIBAetc | AAWADIetc |
Notes | 1.Check and adjust opening pressure regularly; 2.If fuel delivery quantity changes dramaticallyin most cases caused by the orifice blocked by scrap iron ; 3. If injectors are assembled after being cleaned or purged ,the specific composition of nozzle, orifice,and injection line can not be changed casually. |