Specifications

PPC511-75 (110,150) PT pump-nozzle-fuel injection pump integrative stand
easy to operate

PPC511-75 (110,150) PT pump-nozzle-fuel injection pump integrative stand

PPC511-75 (110,150) PT pump-nozzle-fuel injection pump integrative stand is integrative equipment used to provide test and calibration for CUMMINS PT fuel pump, fuel injector. It has pneumatic clamping cylinder, abundant functions, strong integrated capability, and is widely applied. All these characters fit for the test and calibration of CUMMINS PT fuel pump, fuel injector and high-pressure fuel injection pump.
Fit for: PT(G),PT(G)VS,PT(G)MVS,PT(G)SVS,PT(G)AFC-VS,PT(R)AFC,PT(H)-VS fuel pumps etc.
Fit for: seal and flow test of 5/16" and 3/8"PTB,PTC,PTD and 3/8" overhead PTD fuel injectors etc.

PT testing functions:

PT fuel pump                            

PT fuel injector

1.test of gear pump pressure, vacuum, and idle speed.
2.test of pressure, flow and fuel cut-off in every check point.
3.test of AFC,ASA valves.
4.throttle test

1.seal of cylinder block.
2.seal of cylinder.
3.seal of check ball.
4.test of flow.

PT testing technique Parameter:

1. Fuel test demarcation flow   50~320,310~910   Kg/h
2. Fuel test leak flow               20~500     ml./min
3.Air test flow                         40~400    ml./min
4.Fuel quantum                       260          ml

Fuel injection pump testing functions:

1.Oil supply quantum and equality of each fuel injection pump cylinder
2.Fuel injection pump providing spot and interval angle.
3. Test and adjustment of governor working capability
4.Test and adjustment of proportioning pump working capability
5. Test and adjustment of pressure compensator capability
6. Proportioning pump oil return test
7. Proportioning pump solenoid valve capability test
8. Proportioning pump internal pressure measure under diversified stated rotate speed
9. Sealability test of fuel injection pump
10.Oil pump test
11.test and measure the advance angle of advance implement
12. Test of rack track

Fuel injection pump testing technique Parameter:

1.Small and big graduated cylinders each one a set 45ml,150ml
2.Oil tank content: 45L
3.Oil autocontrol: 40°C,±2°C
4.Test oil filtration precision: 5μm
5.Supply DC,12V,24V power supply
6.Triple display controlled temperature of fuel
7.Oil supply pressure: low-tension 0-0.4MPa; high-tension 0-4MPa
8. 4 digits display injection advance angle
9. Display: air pressure, vacuum
10. Rotate speed random preplace: 0-4000rpm
11. Three phase power supply: 380V/50Hz(or by request)
12. Dimension:1800X700X1700(mm)
13. Net weight: 1500Kg
14. Center height:125mm
15. Output power:.5KW~15KW