Specifications

1.Magnetic Iron Powder Separation Equipments
2.High Productivity
3.Low power consumption

     Magnetic Iron Powder Separation Equipments

mineral processing Flotation Equipment Specifications
flotation machine, flotation equipment is applicable for separating non-ferrous metal, black metal, noble metal, etc.
flotation machine, flotation equipment is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.
Features of  Magnetic Iron Powder Separation Equipments, flotation equipment:
The Floatation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.
 Magnetic Iron Powder Separation Equipments, flotation equipment Application:
Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.
  Magnetic Iron Powder Separation Equipmentscovers feeder, crusher, ball mill, classifier, vibrating screen, rocking bed, magnetic separator, mix tank, flotation machine and so on.
The specific Iron Ore processing plant flow is as follows:
1,The extracted ore should be crushed by crusher initially.
2,When it gets the reasonable fineness, it is transported into ball mill by elevating conveyer and feeder, and is milled by ball mill.
3,Since the separated ore are wet, they should be dewatered by thickener initially, and dried by dryer.The
4,The classified ore gets into magnetic separator. Since the specific magnetization coefficients of ores are different, the magnetic substance of mixed ore is separated from others with magnetic and mechanical force. The mineral matter, which has been separated by magnetic separator initially,
5,Transported into flotation machine by conveyer, and different medicines are added according to different characteristics of ore, so that the needed ore is separated from others.
6, Magnetic Iron Powder Separation Equipments subtle milled ore gets the next procedure: Classification. There is a theory that if the weights of solid particles are different, the sedimentations will be different, and the mixed ore can be classified by screw classifier.

 

 

Magnetic Iron Powder Separation Equipments

[url=]Beneficiation Production Line[/url]
[url=]Beneficiation Plant[/url]
[url=]Basalt Crusher[/url]
[url=]Dry Ball Mill[/url]
[url=]Primary Jaw Crusher[/url]