Product Details

high quality long lifespan tube style induction high bay

TECHNICAL SPECIFICATIONS:
1). Power: 80W/100W/120W/150W/200W/300W.
2). Input voltage: 220V, or 90-270V
3). External Electronic Ballast included in luminaire
4). Operating frequency 210 KHz
5). Power factor> 0.99
6). Average life 100,000 hours
7). Efficiency Light 75-80 lm / w
8). 6000-6400 lm Luminous Flux
9). Total Harmonic Distortion THD <10%
10). 2,700 ° K color temperature
11). Color Rendering Index CRI> 86%
12). On and immediately restart
13). It takes 60 seconds to reach 80% brightness
14). Restrike not require cooling
15). Low heat generation
16). Operating temperature -40 ° C to +105 ° C
17).Guarantee: 5 years

18). Certification: CE, RoHS, FCC, CECP,

Fixtures

1. PC or high-temp resistant glass shade, both with excellent light reflector;
2. Extra aluminum reflector ensures high lighting efficiency;
3. Die casting aluminum lamp shell, solid, rustproof and durable;
4. High Temp. Resistant gas-tight silicon rubber seal, IP65 rating;
5. Lamp and ballast set features with high power factors, excellent color rendering and stable output, usually 40W-200W is applied;
6.Protection for ballast from short-circuit, open-circuit and defective lamp.

Certificates

Features:

1) Obvious power-saving efficiency. Use Magnetic electrodeless (LVD lamp) light source. Compare with sodium lights, its energy-saving rate can be as much as 60% or more.
2)Environmentally friendly as induction lamps use less energy, and use less mercury per hour of operation than conventional lighting due to their long lifespan. The mercury is in a solid form and can be easily recovered if the lamp is broken, or for recycling at end-of-life.
3) Show the original color of the objects, High color rendering index reaches 80 Ra or above.
4) Working normally in wide voltage fluctuation. Working voltage: AC 90~150V &. 175~265V .
5)Instant-on and hot re-strike, unlike most conventional lamps used in commercial/industrial lighting applications (such as Mercury-vapor lamp, Sodium-vapor lamp and Metal halide lamp)
6)Operating temperature can be from minus 35 degree centigrade to 50 degree centigrade.
7) Easier to be installed and to be unloaded; Can be used in different places.
8) Excellent protection: all the ballasts are protected from short-circuit, open-circuit, abrupt cut-off, etc.

Applicant area:

Workshops, factories, storehouses, toll stations, gas stations, supermarkets, exhibition halls, gymnasiums, and some other places where need industrial lighting.