Specifications

2 high level outlets
LED display
112dBuV output at single port
FP,DFB,CWDM,RFoG return lasers are available
SNMP transponder

Feature 

• Structural design flexibly, application widely: forward optical receiver, reverse optical transmitter or reverse RFoG;
• Perfect surge suppression circuitry, improved the anti-lightning strike and the prevention of lightning surge shocks;
• Input stage adopt imported low-noise GaAs amplifier, output stage adopt imported  CATV high-performance, high reliability amplify module,greatly improved the C/N and non-linear distortion characteristics while significantly reducing the power consumption;
• Rigorous reliability test,MTBF >100,000 hours;
• Forward optic AGC function, input power at the range -6dBm~+16dBm,the output level change within ±1dB;
• RF output level fixed-adjustable, slope adjustable;1~2 output ports optional,split/tap optional;
• Reserve national standard network management interface Class II transponder,easy for field upgrade directly.

 

Summarize

TON6800HII optical receiver can be used for CATV network, digital network and telecommunication network. It especially suitable for the FTTx network which the fiber extended to the building, the output ports covered subscribers.

TON6800H II input receive optical power range is +1dBm~-6dBm,each RF output level is up to 108dBuV for dual outlets;when the receive optical power is -6dBm,C/N>46dB.

~220V or ~60V power supply optional,the high-performance conversion circuit enable to turn them into +24V,+5V DC power to supply the optical receiver internal device.

 

Diagram

 

Specifications

	Item		Unit	Forward	Return
Optic	Optical wavelength		nm	1200~1600	1310±20
	Optical input power		dBm	-6~+1	—
	Optical output power		dBm	—	≥0
	Optical return loss		dB	≥40	—
	Input power indicate		dBm	1:1	OP test point:1V/mW
	Return laser type			—	DFB/FP option
	Optical connector			FC/APC or SC/APC
RF	Bandwidth		MHz	87(54)~860(750)	5~65(42)
	Standard output level (Input power@-6~+1dBm)		dBuV	≥108	—
	Link flatness		dB	±1.5
	RF output ports number		pcs	1~2	—
	RF test point		dB	-20±1.0
	Impedence		ohm	75
	Return loss		dB	≥16(87~860MHz)	≥16
	Link	C/N	dB	≥51.0	—
		CTB	dBc	≥65.0	—
		CSO	dBc	≥61.0	—
		NPR Dynamic Range	dB	—	15@NPR≥30
General	Dimension		mm	250×210×130
	Voltage		Vac	220 or 60
	Power Consumption		VA	<18
	Operating Temperature		°C	-25~+55
	Storage Temperature		°C	-25~+65
	Weight		Kg	3.2