Product Details

IR touch screen frame,Infrared touch screen frame

Product Description:

Infrared(IR) touch screen operate on the mechanism of infrared LEDs arranged in arrays on two adjacent bezel edges of the PCB with photo sensors placed on the two opposite edges functioning as transmitters and receivers. The LEDs emit infrared rays simultaneously to form a grid of rays across the display.

Advantage:

Singel-touch and Virtual Dual-touch

Vandal-proof, Dust-proof and IP65 Available
Support zoom in/out, display rotation
Withstands severe environments
Stable, no-drift calibration performance
Vandal- and abrasion-resistant screens, ideal for rugged applications
Parallax-free performance for LCD displays
Sealable against contaminants
Operable in various light conditions, indoor and outdoor

Application:

Point-of-information kiosks
Electronic catalogs
Gaming, POS, ATM, lottery, and amusement
Industrial control rooms
Computer-based training

Specification:

Size
General Size	15 inch to 400inch
Application	lay on the lcd or projector
Performance
Touch Mode	Single-point touch, Dual -touch Multi-touch, drag, draw-line, rotate, zoom in/out
Resolution(Interpolation)	4096*4096
Linearity Error	<1.5mm
Response Speed	<15ms
Mechanical
Input Method	Finger or gloved hand (rubber ,cloth or leather)
Touch Times	Unlimited
Touch Activation Force	No minimum touch activation force is required
Minimum Touch Object	2.5 mm X 2.5 mm
protection	Anti-Glare,Anti -water,Anti-Reflective,Anti -Dust
Operation system	windows series,Android,linux
Optical
Glass:	with or without tempered glass, AG (anti-glare), or AR (anti-reflective) glass optional or tempered glass about 2mm,2.8mm,3mm,4mm,5mm
AG Glass	Basic Concept: Anti glare glass, also known as non reflective glass or diffuse reflection glass, to one-sided or two-sided special treatment of glass surface Multi angle reflection effect, so as to improve the visual angle of screen, reduce interference from ambient light, reduce the reflective screen. Processing size: Max: 1700 mmx1300 mm Min: 50 mmx50 mm Thickness: 0.7mm--8mm (according to customers’ requirement)
AR Glass	Basic Concept: the transmissivity can be over 98%, the reflectivity can be lower 1% . film structure on both surface glass : 1):single surface AR glass(double layer) GLASSTIO2SIO2 2):double surface AR glass(four layer) GLASSTI02SIO2TIO2SIO2 3):Multilayer AR glass ---Base on client requests Processing size: Max:1600 mmx2800mm Min:200mmx200 mm Thickness:1.1mm--6mm (according to customers’ requirements)
Environmental
Temperature	Operating Range: -20°C ~ 70°C;
Temperature	Storage Range: -40°C ~ 85°C
Relative Humidity	Operating Range: 0%~90% RH (no dew falls)
Relative Humidity	Storage Range: 0% to 95% RH (no dew falls)
Altitude	Up to 3,000m
Ambient Light	Direct sunlight 90°to ±30° to the display surface Touch detection operational
Ambient Light	Direct sunlight all angles to display surface Free of false touch reports
Electrical
Operation Voltage	Typical +DC 5V, +4.75V to +5.25V
Power Supply	Size under 52”(include 52”)USB or PS/2 Interface, power ripple max.200mV rms
Power Supply	Size above 52”(52” not included): external AC-DC power adaptor
Interface	Full Duplex USB 2.0 (Full Speed) Plug and play compatible
Interface	Serial RS-232. Baud Rate: 9600, 8 Data Bits, 1 Stop Bit, No Parity
Current	Typical 150MA@+5VDC; 350mA, maximum
Power	<1.5W, operating current<300mA
Electrostatic Protection	15 kV air / 8 kV contact discharges (EN61000-4-2,1995 :Level 4)
Controller	Integration inside touch panel
Agency Approvals	CE, FCC, Rohs
Operating System
Operation System: Perfectly Support Windows XP / Windows 7 / 8 / Linux

Product shown

Application shown:

AG /AR design shown:

Touch the screen (Drew -line ,Drag,Rotate,Zoom -in,Zoom-out)

Assembled shown:

Factory Shwon: