Name: PID Controllers
Brand: Anupam
Availability: InStock

Product Details

Product Description

Anupam's introduces state of art, truly universal, powerful PID controller with inhouse design. The PID2020 series is developed with state of art microcontroller. The robust hardware and software makes the controller very useful in noisy industrial environment. The PID2020 finds applications in Industrial Ovens, Muffle Furnaces, B.O.D. Incubators, Humidity Chambers, Environmental Chambers, Sterlizers, Blood Bank Equipments, Constant Temperature Baths, Packaging, Plastic Moulding, Thyristors Heat Controllers, Motor Controllers, Controlled Melting, Valve Control...etc.

Table "A"

INPUT	SENSOR	RANGE	ACCURACY
R.T.D.	PT-100	-200 to 600 °C	± 1 °C
R.T.D.	PT-1000	0 to 500 °C	± 1 °C
THERMOCOUPLES	Chromel/Alumel (K)	0 to 1300 °C	± 1 °C
	Iron - Constantan (J)	0 to 750 °C	± 1 °C
	Copper-Constantan (T)	-200 to 350 °C	± 1 °C
	Pt / Rh (R or S)	0 to 1700°C	± 1 °C
D.C. LINEAR INPUTS	4 to 20 mA / 0 to 20 mA	User Programmable	± Least count
	± 50 mV, ± 100 mV,	User Programmable	± Least count
	± 200 mV, ± 250 mV	User Programmable	± Least count
	± 1V, ± 3.3V,	User Programmable	± Least count
	± 5V, ± 10V	User Programmable	± Least count

Features

Initializing the controller integral to a desired value.
Increasing the setpoint in a suitable ramp.
Disabling the integral function until the PV has entered the controllable region.
Limiting the time period over which the integral error is calculated.
Preventing the integral term from accumulating above or below pre-determined bounds.

Specifications

Element Type	Specification
Input	ONE UNIVERSAL Input Thermocouples : J,K,T,R,S RTD's : PT-100, PT-1000 DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts) DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
Range	Refer 'table A''
Ambient	Compensation automatic, ambient 0-60 °C
Resolution	1 or 0.1 or .01 or .001 programmable
Display	Super bright in 4 + 4 format , with NO BLINK programming technique Upper 4 digits 0.5" red colour Lower 4 digits 0.39" green colour
Ananciation L.E.D's	7 L.E.D.'s , 3 mm , multi colour, 3 for O/P's, 1 each for A/M, Alarm, Profile, Soak Time
Parameter Setting	By soft touch, Elegant, Sturdy membrane keys & User friendly menu driven software
Outputs	THREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
Note	Output modules are predefined All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
INPUT Control Outputs Rating	Relay SPST 230V / 3 Amp, 12 volts DC pulses for , 4-20 mA (Load 450 ohms)
CONTROLS
Control Action	PID / On-OFF / TP PID P = Propotional Band = 1.0 to 999.9 units adjustable I = Integral = 0 to 3600 ( 0-1200) seconds adjustable D = Derivative = 0 to 500 seconds adjustable CT = Cycle Time = 0.5 to100 seconds adjustable On-OFF Hysteresis = 1 to 99 units adjustable Time Proportional = 0.1 to 100.0 units adjustable
Control Action Assign	PID for O/P 1 and O/P 2 ON-OFF for O/P 1, O/P 2 , O/P 3 T/P for O/P 1, O/P 2 , O/P 3
Control Modes	Heat / Cool / Heat-Cool
Overshoot Control	Provided
Soak Timer	Assigned for O/P 2 or O/P 3, Soak Timer programmable (HH-MM or MM-SEC) Set Point Start up or Power on start up
Manual Output	Provided, 0 to 100%
ALARMS	Assigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
Retransmission	4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
Communication	RS485, 2-Wire, Half duplex RS485 MODBUS on request, MODBUS RTU or ASCII Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
PROFILER	2 Profile Programmes / 8 Segments Each Each segment programmable for either RAMP or SOAK Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL Soak Time programmable in HH-MM , MM-SEC Overshoot control during profile Event on End of segment and / or End of profile

Packaging & Shipping

Packaging	As per your Requirement
Shipping	As per your Requirement

Company Information

Company Certification
With the mindset of adherence to quality standards, Anupam Heaters is the 1st Indian Heater Manufacturing company to undergo audit for Quality Management System by Lloyd's Register and achieved certification under ISO 9001-2000. Currently certified under ISO 9001-2008, we take great pride to inform that our products are also meeting the European Safety Standard EN60335-1 “CE-Mark”.

Company History
Established in 1984 & Pioneers in developing Ceramic Band Heaters in India, Today we are one of the leading Indian companies to manufacture wide range of quality Heating elements for Plastic & Other Allied Industries. Since our inception, we have established a strong foothold in the Indian & Overseas market.