Name: Abrasion resistance ceramic conveyor belt
Brand: Kingcera
Availability: InStock

Product Details

Abrasion resistant ceramic conveyor belt

There are many abrasion resistant ceramic conveyor belt in the steel industry, cement,mining ,port and so on. Usually,the rollers are wrapped by a layer of rubber to prevent them from slipping. But usually,if the roller works in the water environment, the material are easy adhere to the belt or roller. Then it can be easy slip.

Our Kingcera abrasion resistant ceramic conveyor belt are adopt the new methods. We valcanized the grain shaped ceramic into the rubber and wrap onto the roller. it not only prevent the roller from slip, can also prolong the roller's service life span.

Advantages:

1.The rough surface of ceramic lagging pulley, prevent the belt and roller from slip.

2.Abrasion resistant, it can prolong the service life span 10 time at least.

3.Gutters between the ceramic are good for draining away water.

The performance testing report for abrasion-resistant ceramic lagging

The performence	Content of AL₂O₃	≥95%
	Density	≥3.6 g/cm³
	Rockwell hardness	≥85 HRA
	Rupturing toughness	≥5.0MPa.m1/2
	Compression-resistant strength	≥850MPa
	Bend-resistant	≥290MPa
	Pull-apart strength(MPa)	≥7.5
	Pull-apart prolongation(%)	≥300
	Shore hardness	55-65
	Permanent deform(%)	≤24
	Adhesion of the adhesive agent and the ceramic(MPa)	≥3.0
	The form service life of the adhesive agent	≥15
	Temperature-resistant	≤250°C
	Coefficient of conducting heat.	20w/m.k
	The performance to be nonflammable	excellent
	Coefficient of heat-expandability	7.2×10-6m/m.K