Specifications

1.drop test& package test,small component qualification test,modal test
2.Small size,light weight
3.single axis/triaxial

1. Highlights

1)          No moving parts provides durability

2)          Rigidity imparts high frequency range

3)          Lightweight construction minimizes mass loading

4)          Numerous configuration options

5)          Mount by screw, stud, or adhesive

6)          Available with both Quartz elements (for thermal stability) or Ceramic elements (for high measurement resolution)

 

Structured with highly sensitive piezoceramic sens­ing elements, Ceramic Shear IEPE Accelerometers have an excellent signal-to-noise ratio, high measurement resolution, and are ideal for conducting low-level vibration measurements. Due to their inherent higher sensitivity, a ceramic IEPE accelerometer can be assembled with a smaller mass than comparable quartz units, resulting in a sensor that is lighter in weight, has a higher frequency response, and has a lower noise floor.

 

To further reduce the mass of the sensors, all ceramic shear accelerometers are housed in either tough, lightweight, laser-welded, hermetically sealed, titanium or aluminum housings. By minimizing the mass of the sensor, mass loading effects are reduced, which maximizes the accuracy of the data obtained.

 

Charge Output miniature accelerometers are capable of operation to +250 °C, permitting measurements in extreme environments and with existing charge amplified systems.
Triaxial accelerometers are available in a variety of sensitivities to suit specific application requirements. Choose miniature, lightweight units for high-frequency response, minimized mass loading, and when installation is in space restricted locations. Low profile designs are ideal for on-road or wind tunnel testing of exterior body panels. Through-hole mount units simplify axis and electrical connector orientation while controlling cable routing along the test specimen. Filtered output units avoid high frequency overload as may be encountered with engine NVH and drive train measurements.

2.Specifications

Miniature Single Axis IEPE/Charge(PE) Mode Accelerometers

Model

Sensitivity

Frequency Range (±10%)

Measuring Range

Resolution

Operating Temperature

Weight

OutputType

Mounting Type

Size

161A100

100mV/g

1Hz to 10kHz

±50g

1mgrms

-40 to +121°C

7.5Gram

M5

Adhesive

261A05

5pC/g

1Hz to 10kHz

±2500g

N/A

-54 to +150°C

7Gram

M5

162A100

100mV/g

1Hz to 10kHz

±50g

1mgrms

-40 to +121°C

7.5Gram

M5

Adhesive Isolated

262A05

5pC/g

1Hz to 10kHz

±2500g

N/A

-54 to +150°C

7Gram

M5

164A10

10mV/g

1Hz to 12kHz

±500g

10m grms

-40 to +121°C

4Gram

Integral Cable /5-44

M3/5-40

264A03

3pC/g

1Hz to 12kHz

±10000g

N/A

-54 to +150°C

5.0Gram

M3/5-40

266A01

1pC/g

1Hz to 15kHz

±20000g

N/A

-54 to +150°C

1.8Gram

Adhesive

Φ5×10mm

Miniature Triaxial IEPE Mode Accelerometers

Model

Sensitivity

Frequency Range (±10%)

Measuring Range

Resolution

Operating Temperature

Weight

Output Type

Mounting Type

Size

141A10

10mV/g

1Hz to 6kHz

±500g

10mgrms

-40 to +121°C

12 Gram

1/4-28 4-pin

M2.5/Adhesive

12mm3

141A20

20mV/g

1Hz to 6kHz

±250g

6mgrms

-40 to +121°C

12Gram

1/4-28 4-pin

M2.5/Adhesive

12mm3

141A50

50mV/g

1Hz to 6kHz

±100g

2mgrms

-40 to +121°C

17.5Gram

1/4-28 4-pin

M2.5/Adhesive

14mm3

141A100

100mV/g

1Hz to 6kHz

±50g

1mgrms

-40 to +121°C

17.5Gram

1/4-28 4-pin

M2.5/Adhesive

14mm3

 

3. Product overview

 

 

4. Packaging

5. Company information

Our Products:

  Vibration Accelerometers

  Vibration Velocity Sensors;

  Vibration Displacement(Eddy) Sensors

  Quartz Force IEPE Sensors

  Quartz Pressure IEPE Sensors

  Signal Conditioners

  Data Acquisition Systems

  Power Amplifiers

  Modal Shakers

  Small Vibrators 

  Vibration Calibrators