How to stock ECOLOGICAL BRICK bricks------From Linyi Wante Machinery Co.,Ltd
USD $7,680 - $8,600 /Set
Min.Order:1 Set
Linyi Wante Machinery Co., Ltd.
How to stock interlocking bricks------From Linyi Wante Machinery Co.,Ltd
Dear sir,
This is JoJo from Linyi WANTE Machinery and today we will introduce how to stock the ECOLOGICAL BRICK
And questions about the clay interlocking bricks and brick machines , please contact me feel free.
ECOLOGICAL BRICK - HOW TO STOCK?
Recommendations for there to be product of quality starts at the stacked soon after the removal of the ecological brick from the machine. Manufacturers around the world, use a variety of methods forstacking, but each one search the best way to meet your particular need, that is, according to physical space, employee numbers and even the daily production quantity can determine the best way this action. |
Let us illustrate some forms used by our customers, but remember that you should search the best way that meets you, or consulting a technical expert: |
Stacking on pallets:
Used by most manufacturers this stacking method for curing and storage is the most appropriate, since the bricks on pallets are not in contact with the floor, handling and loading is also more practical when using pallets. |
Obs .: After cured ecological bricks can be in the open or exposed to the weather. ome forms used by our customers, but remember that you should search the best way that meets you, or consulting a technical expert: |
Stacking On The Floor
This stacking method is used by producers who prefer the curing process and the stocking off the pallets,
where they remain at a local level, concreted, covered and with minimal external intervention. It can be transferred
to the pallets after three days (to complete the cure), or maintain on the ground until the time of delivery.
In both cases, the same can be stacked inter-locked, unilateral or alternating superimposed, depending on the
condition of the ground surface or pallet, and is also influenced by the type of material used but care of the
overload must also be maintained because the excess rows can compromise the bricks that are at the bottom
after all when it gets out from the machine it is fragile.
Working process OF How to stock interlocking bricks------From Linyi Wante Machinery Co.,Ltd
1. Big clay made into small size by soil crusher
2. Remove the big size clay, use small size clay only
3. Pour the clay and cement to mixer , mixing them with water
4. Transfer the finished raw material to host machine by conveyor machine.
5. Produce green block.
6. Carry the green block to curing aera.
Main parameters
WT1-10A hydraulic interlocking block machine | |
Overall size | 1400(L)×1100(W)×2100(H)mm |
Shaping cycle | 10-12 seconds |
Power | 7.5 KW |
| 12 Hp diesel engine |
Pressure | 16Mpa |
Total weight | 1300 KGS |
Mesh main parameters
Overall size mm | 1100(L)×1100(W)×1400(H)mm |
Motor | 5.5KW |
Capacity | 500KGS/H |
Electricity | 380V/220V/ (adjustable) |
Total weight | 300 KGS |
Crusher main parameters
Power | 3KW |
Capacity | 480KGS/h |
Rated power | 380V or 220V |
Size | Diameter:500mm |
Total weight | 320 KGS |
Mixer main parameters
Overall size mm | 1200(L)×1200(W)×1200(H)mm |
Mixing time | 3-5mins |
Feeding volume | 500L |
Output volume | 350L |
Power | 7.5 kw |
Total weight | 400 KGS |
Some blocks show
OUR CSUTOEMRS
OUR CSUTOEMRS of WANTE BRAND WT2-10 Factory price hydraulic interlocking brick press