35W/55W CANBUS H7 HID Xenon Conversion Kit- top sales hid auto head lamp
USD $9 - $15.5 /Set
Min.Order:20 Sets
Guangzhou Shaen Trade Co., Ltd.
H7 HID Xenon Conversion Kit
35W/55W CANBUS H7 HID Xenon Conversion Kit- top sales hid auto head lamp
CANBUS H7 HID Xenon Conversion Kit
Canbus 35w/55w ballast specifications:
1. 35w/55w canbus hid ballast
2. Can solve all canbus problems
3. Warranty for 14-18 months
4. Cancels false board computer warnings
5. Accept cut wire for warranty
6. Accept small order,samples order is ok
What is Canbus?
In the top-end cars of today you will find about 1.25 mile of wire with a total weight of about 220lb. Sometimes wiring harnesses in different car models exceed the amount of 600. From an economical point of view it makes sense to explore alterative technologies to the traditional wiring. The automotive industry, especially the German, French and American started to look for new modern communication methods. This resulted in the canbus technology.
The CAN technology for low and high speed data transfer system has been applied from 1992 by Mercedes (S class). BMW and Porsche followed rapidly and today also VW, Renault and Fiat and others apply the CAN technology in their mid class cars.
Through this CAN-bus system various signals are sent through the car's electrical wiring. Also the car can measure and health check various accessories connected to it.
Most modern cars permanently measure the health condition of the lighting system, also when lights are switched off. A broken bulb is immediately detected, a warning is send to the driver and sometimes the power is automatically switched off, for safety reasons.
This is where the problem occurs when the car's lighting system is converted to xenon. A xenon lamp has a completely different electrical behaviour compared to a halogen lamp. This is mainly caused by the power converter that a xenon bulb needs, the ballast.
When switched on, a halogen bulb draws high current because the filament is cold and hence has a low resistance. Shortly after ignition the current decreases and eventually stabilizes at about 4,5 Ampere. This process takes about 100 ms.
A ballast however behaves completely different. Most ballasts do not immediately draw current after switched on. After a short while the current consumption looks quite unpredictable and eventually the system stabilizes around 3 Ampere. But in many cases the car's on-board computer has already decided that something is wrong and disconnects the power.
The trick is to make a ballast that behaves like a halogen bulb.
Another problem is the noise produced by the ballast. The ballast contains a switched mode power supply that produces noise. This noise can confuse the CAN-bus system with unpredictable results like windows that open automatically (or don't close anymore), wipers that start moving, the car's radio that produces noise etc. etc.
This noise can be eliminated by a warning canceller that can be used in combination with the ballast.
These special capacitors suspend the electrical noise that possibly is generated by ballasts. Also it cancels false board computer warnings. Is mainly used in conjunction with budget ballast but can also be used with other ballast types.
What is the Function of canbus?
1)Reverse voltage protection: No damage against ballasts and bulbs will be caused by reverse connection.
2)Protection of Short Circuit: Lock protection against continuous or long-time short circuit.
3)Protection of Open circuit: Lock protection in 0.7s after Open circuit.
HID Specification:
Initial Voltage : Dc 23000V
Steady Voltage: 85V
Luminous flux: 2500~3500 lumen
Lifetime: 3500 hours
Operating temperature :-40 degree~ +105 degree
Output power in stable state: 35w/55w
Cover: crystal glass tube of UV-CAT anti-ultraviolet
Color temperature and color
Color temperature: 3000K,4300K,5000K,6000K,8000K,10000K,12000K,30000K
3000k~golden
4300k~yellow white
6000k~diamond white
8000k~blue white
12000k~bluish-purplish
30000k~Blue
Speical~Pink, Green, Purple, Blue
HID Xenon Lamp Available :
1. HID Single beam
Lamp:5202,H1,H1C,H3,H3C,H4-1,H7,H7C,H7R,H8,H9,H10,H11,H13-1,9004-1(HB1),9005(HB3),9006(HB4),9007-1(HB5),D1C(D1S/D1R),D2C(D2S/D2R),D2H,D4S,880/881
2.HID Hi/Lo Lamp(Xenon L+Halogen H):H4-2,H13-2,9004-2,9007-2
3.HID Hi/Lo Telescopic Lamp:H4-3,H13-3,9004-3,9007-3
4.HID Hi/Lo Bi-xenon Lamp:H4-4 (2 HID bulbs on each bulb,with 4 ballasts)
What is xenon HID xenon Lamps?
HID refers to lighting technology that relies on an electrical charge to ignite xenon gas contained in a sealed bulb. A regular halogen bulb uses a filament which can burn out in as little as 200 hours. HID bulbs are gas filled capsules that are rated for a lifespan of nearly 4500 hours. HID bulbs also shine much brighter due to this technology.
Unlike halogen bulbs, HID's emit a type of light that closely resembles natural daylight and is therefore easier on human eyes. In fact, HID lights are currently use in most sports arenas, stadiums, and train stations worldwide. Do not be fooled by lower end Xenon replica bulbs sold at most retail shops. They are no match for the intensity, purity, and efficiency of high intensity discharge headlight.
Strict-Testing on HID series:
•High/low Temperature Testing;
•IEC 68-2-6 Tremor Testing;
•EN60529 Waterproof and Dustproof Testing;
•DIN Antisepsis Testing;
•Instant Hi/Low Voltage testing;
•1000 times /one minute Open-Circuit-Testing;
•EMC CISPK22 guard against hertzian waves.
About Us
1. Business Type: manufacturer;
2. Product Range: HID Ballast, HID Lights, Car LED;
3. Brand Name: SHAEN
4. Located in Guangzhou, China's biggest auto parts manufacturing and sourcing center, our factory has been producing auto hid lights and led lights for over 5 years. In order to earn your partnership, all of our staff will make the products' quality guaranteed and service reliable.