SC Series Standard Double Action Adjustable Stroke Pneumatic Cylinder
USD $2 - $500 /Unit
Min.Order:10 Units
YUEQING SENTE TRADING CO., LTD.
High frequency modified sine wave 500w 12vdc to 240vac inverter
High frequency modified sine wave 500w 12vdc to 120vac inverter
High frequency modified sine wave 500w 12vdc to 100vac inverter
High frequency modified sine wave 500w 12vdc to 230vac inverter
High frequency modified sine wave 500w 12vdc to 110vac inverter
High frequency modified sine wave 500w 12vdc to 220vac inverter
BEST PRODUCTS WITH CHEAPER PRICE IS OUR GUARANTEE !
SC Series Standard Double Action Adjustable Stroke Pneumatic Cylinder
1.High safety performance
2.Low start pressure
3.Stable operation
4.Fine tightness
5.Long service life
6.Energy conservation and environmental protection, can recycle
7.Beautiful appreance
8.Widely used in automatic devices, eg. light industry, chemical industry, textile, electron, machinery, etc.
9.Non-standard,OEM is available.
Product Details
Product Feature
1.Standard cylinder manufactured by our enterprise.
2.The seal of piston adopts heterogeneous two way seal structure.It’s dimension is tight and it has the function of grease reservation.
3.It is tie rod cylinder.The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
4.Compared with ISO15552 standard cylinder,SC series cylinder with the same bore size is shorter.
5.The buffer adjustment of cylinder is smooth and steady.
6.Cylinders and mounting accessories with several specifications are optional.
7.The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
Installation&Usage
1.When load changes in the work,the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the codition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity,much dust or water drops,oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
6.The cylinder shall be carried out test run without load before application.Prior to run,
buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
7.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
8.If the cylinder is dismantled and stored for a long time.pls conduct anti-rust treatment to the surface.Anti-dust caps shall be added in air inlet and outlet ports.
Specifications
Bore(mm) | 32 | 40 | 50 | 63 | 80 | 100 | |
Action type | Double Acting | ||||||
Working Medium | Air(To be filtered by 40um filter element) | ||||||
Mounting type | SC | Basic FA FB CA CB LB TC TCM1 | |||||
SCD,SCJ | Basic FA LB TC TCM1 | ||||||
Operating pressure | 0.1~1.0MPa(15~145psi)(1.0~10.0bar) | ||||||
Proof pressure | 1.5Mpa(215Psi)(15bar) | ||||||
Temperature Range | -20~80 | ||||||
Speed Range mm/s | 30~800 | ||||||
Stroke tolerance | 0~250(+1.0~0);251~1000(+1.4~0); 1001~1500(+1.8~0) | ||||||
Cushion type | Variable cushion | ||||||
Adjustable cushion stroke mm | 21 | 28 | 29 | ||||
Port size(1) | 1/8" | 1/4" | 3/8" | 1/2" |
(1). PT thread,NPT thread and G thread are available.
More details
Series Products
Package & Delivery
Company Information
Our Services
1. Any question from you are welcome and will be replied in 24 hours.
2. The reasonable price.
3.Answer your question detailed.
4.Solved the problem with you during using our products.
5.Samples will be offered to you for our future cooperation.
Contact Information