LC-LC MM OM3 Duplex 50/125 Fiber Optic Patch Cables/Jumper Cables

Introduction:
10Gb OM3 Multimode fiber optic patch cables are 50 micron diameter for the actual glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250nm. The glass is a higher grade than normal 50/125 cables. You should ensure that you purchase patch cables that match the core of any other fibers already in your system. The PVC jacket of the OM3 multimode fiber is normally aqua color (although we can make them in other colors) and is 3.0mm in diameter for ST, SC, and FC connectors, but 2.0mm if the cable has an LC or MTRJ connector. We can also make these cables with a plenum jacket or a LSZH jacket, if required.
The cables below are 50/125 glass and are classified as OM3 fiber, which means at 850nm (wavelength of the light source), they have a bandwidth of 1500 MHz-km, maximum attenuation of 2.3dB/km, and a typical maximum distance of 1km at 100mbps and at 1000mbps, and 300 meters at 10Gbps.
At a wavelength of 1300nm, they have a bandwidth of 500 MHz-km, max attenuation of 0.6dB/km, and typical max distance of 2km (at 100mbps), 600 meters (at 1000mbps), and 300 meters (at 10Gbps).
These are duplex cables (two fibers and two connectors at each end).
These 50/125 fiber cables are optimized for 850nm light sources and gigabit or ten gigabit speeds.

Contact with me:

Name:mickeyma

Phone/Whatsapp:+8618758357139

Skype:mickeyma90