Industrial zirconia Ceramic Parts/Zirconia Pins Insulation
USD $0.8 - $20 /Piece
Min.Order:100 Pieces
Shenzhen Huaxin Precision Ceramics Co., Ltd.
Industrial Zirconia Ceramic Sleeve & Good Quality Machinable Ceramic Bush
High Resistance Industrial Mechanical Zirconia Ceramic Gears Rod
Good Wear Resistance Zirconia Ceramic Parts Machinable Ceramic Shaf
Customized industrial textile part/textile ceramic spare part
High hardness/textile ceramic spare part/zirconia textile ceramic parts
Zirconia ceramic insulation welding pins
-Mechanical strength
-Wear resistance
-High hardness
-Used in welding
Features:
1.Use temperatures up to 2400°
2. High density
3. High hardness
4. Low thermal conductivity
5. Chemical inertness
6. Resistance to molten metals
7. Good Wear resistance
8. High fracture toughness
We can supply the products according to customer's drawings, samples and performance requirement.
Zirconia ceramic are used in shaft , plunger, sealing structure, auto mobile Industrial, oil drilling equipment, Insulation parts in electrical equipment , ceramic knife, ceramic hair clipper spare parts, with high density, bending strength and breaking tenacity.
Performance For Industrial Ceramic | |||
Item | Unit | Zirconia | |
Physical Characteristics | Heat resistance | 0C | 2200 |
Bulk density | g/cm3 | 6.05 | |
Water absorption | % | 0 | |
Mechanical Characteristics | Flexural strength | Mpa | 1000 |
Hardness vickers | Gpa | 89 | |
Elastic modulus | Gpa | 200 | |
Poisson’s ratio | 0.31 | ||
Thermal Characteristics | Linear expansion coefficient | (20-5000C) 10-6/0C | 10 |
Thermal conductivity | w/(m.k) | 2.5 | |
Specific Heat | *10-3J/(kg*K) | 0.5 | |
Electrical Characteristics | Dielectric constant (1MHZ) | - | N.A. |
Dielectric loss angle | *10-4 | N.A. | |
Dielectric strength | *106V/m | N.A. | |
Processing technology | |||
Process range (mm) | |||
Outside Diameter | 1---300 | ||
Inside Diameter | 0.5---300 | ||
Length | 0.5---600 | ||
Accuracy of working (mm) | |||
Perpendicularity | 0.001 | ||
Concentricity | 0.001 | ||
Roundness | 0.0005 | ||
Straightness | 0.005 | ||
Parallelism | 0.01 | ||
Planeness | 0.005 | ||
Roughness | 0.005 | ||
Fit clearance | 0.005 |