packaged sewage water treat plant
Precisely designed packed sewage treatment plant is used for treating sewage or effluent generated by hospitals, Institutions/commercial building, large colonies, hotels and others. The treated water can be reused in gardening.
PSTP is the most compact “all in one” system available.
Civil works are minimal.
Units are fully covered preventing noise and fly nuisance.
It is a modular unit that lends itself to future expansion or relocation.
It is designed to accept raw (unsettled) sewage and produce a high quality final effluent without the need for ancillary tankage or equipment.
BOD < 5 mg/litre.
COD < 30 mg/litre.
TSS < 5 mg/litre.
Ph : 7 to 8.5.
Oil & Grease < 1 mg/lit
Parameters Inlet Outlet With Optional
BOD 250 ppm <5 ppm
COD 400 ppm (biodegradable) <30 ppm (biodegradable)
Suspended Solids 250 ppm <5 ppm
PH 6.5 – 8.0 6.5 – 8.0
Oil & Grease Traceable Nil
Fluidized media reactor system
Flock forming organism’s form clusters or attach to available surfaces. The FMR carrier material allows high biomass concentrations per cubic meter of material, which:
Increases the specific volumetric capacity of activated sludge tanks.
Controls biomass activity.
Civil works are minimal.
Reduces operating cost.
The FMR technology is a single tank design unit; incorporating : A bar screen, specially designed tank with synthetic media, lamella settler, and chlorine contact tank.
Significant reduction in space requirement due to high surface area & loading rate of FMR media.
Reduced power and operating costs.
No Sludge recycle.
No moving parts, less maintenance.
Designing a new waste water treatment plants when operating cost & space are constraints.
Upgrading of existing waste water treatment plants.
Operate plants in low temperature areas.
Reduce bulking problems in existing treatment plants
