Product Details

Introduction

characteristics and main function

YM series chlorine dioxide generator is our company at home and abroad in-depth study of similar products on the basis of advanced technology, after years of exploration, innovation and practice, using the latest technology and special high-quality materials from. The product with remarkable features of advanced technology, convenient operation, easy maintenance, low operating costs, long service life etc, its combination property is leading level at home and abroad. The equipment has widely used in drinking water, swimming pools’ water, hospital wastewater disinfection; industrial circulating cooling water sterilization Algicide; industrial wastewater decolorization, deodorization and removal of reducing pollutants.

Structure and Working Principle

(1) Overall Structure and Working Principle:

Overall structure: generator feed system, reaction system, absorption system and security system. shell is PVC material.

Working Principle: under negative pressure conditions, sodium chlorate and hydrochloric acid aqueous solution will go into reaction chamber from raw materials’ box by feed tubes, adding valve, proceed full reaction, output disinfection gas which mainly component is dioxide chlorine, by water injector absorb it ,and make fully mixed with water forming a disinfectant solution, connect to disinfected water.

Schematic diagram of equipment components and Description:
NM Components Name     Function
1 Liquid Level      shows liquid level of raw materials tank
2 Adding valve    adjust raw materials’ dosage
3 valves for raw materials’ dosage    open or turn off raw materials, use for turn on and turn off

4 Suck feed tube add sodium chlorate and hydrochloric acid solution with

5 link Valve open it when raw material box sucking material, close it after finish sucking

6 vent valve open it when raw material after finishing suck material, close it when raw material box sucking

7 outlet one-way valve outlet of chlorine dioxide, prevent water backflow into inside of devices

8 outlet valve only close it when raw materials box sucking

9 Discharge Sewage valve When cleaning discharge residue liquid in reactor

10 Discharge Valve Emptying raw materials in raw material tank

11 Safety valve it’s specific Decompression way when improper operation

12 Adding water inletheating water tank inlet

13 Water Outlet Heating radiator outlet

14 Heating Window

15 Air Inlet air way when operation

(3) Main Components Function and working principle

1,Ejector Water: Water jet injector is air exhaust components designed according to jet flow principle , when the power water pass by water injector, generating negative pressure inside , the external gas absorbed into water injector by differential pressure to achieve inhale. Absorbed Chlorine dioxide mixed with water in here to form a disinfectant.

2,Adding valve: adjust the dosage of raw materials according to requirements of chlorine dioxide

3,Air inlet:access of operation, when install, can link pipeline and lead to outdoors, keep connect with air

4,Safety valve: it’s specific Decompression way when improper operation

After open safety valve, removal fault, then reset safety valve plug

Technical Data:

Model	Available chlorine volume(g/h)	Weight (kg)	Equipment Size(mm)	Power water		Power (kg)
Model	Available chlorine volume(g/h)	Weight (kg)	Equipment Size(mm)	Pipe diameter(mm)	Pressure (Mpa)	Power (kg)
YMEB-100	100	70	480x450x1000	25	≥0.25	0.5
YMEB-200	200	72	500X450X1050	25	≥0.25	0.5
YMEB-500	500	85	550X500X1100	25	≥0.25	0.5
YMEB-1000	1000	96	600X550X1150	32	≥0.25	0.7
YMEB-3000	3000	129	650X600X1250	32	≥0.3	1.5
YMEB-4000	4000	147	700X650X1400	50	≥0.4	2.5
YMEB-5000	5000	165	750X700X1600	50	≥0.4	3.0
YMEB-7000	7000	182	800X750X1700	75	≥0.4	3.4
YMEB-20000	20000	265	1000X850X1900	90	≥0.4	4.5

FAQ

[Q]How to buy your idea products?

[A]You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).

[Q]What is your payment terms?

[A]TT and L/C are acceptable and TT will be more appreciated.30% deposit in advance and balance before loading.

[Q]What is the delivery time?

[A] It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

[Q]How to pack the products?

[A]We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

[Q]How to keep your equipments from corrosion?

[A]We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.

[Q]How do you manufacture your equipment ?

[A]Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.

[Q] How to install after the equipments arriving destination?

[A] We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.