Specifications

low failure rate and cost of maintenance
Easy operation and install
high burning ability

LDF series medical solid waste incinerator

 

 

 

LDF-20 medical solid waste incinerator

 

LDF series medical waste incineration installation with the characteristic of small size, high efficiency and reasonable incineration, leading technology, higher harmless degree, is the ideal garbage treatment facilities apply to all kinds of hospital, hotel, station.

 

Main Features:

 

1. The gasifying incineration technology to be applied to the incineration injector, feeding container and other medical equipment as well as different paper slash, bandage, cotton column, different kinds of medical pollutants and various wastes discharged by hospitals and medical organization.

 

2. The gasifying incineration way is utilized and the rubbished produced each day is able to handle the one-off incineration treatment.

 

3. The gasifying incineration, mixed incineration, burn-out treatment and other technologies are used to make the content of the smog exhaust and dust lower than the discharge standard regulated by the nation.

 

4. Fully seal operation is adopted to be applied to dealing with the infectious medical waste and avoid the secondary pollution.

 

5. Small volume and site area.

 

6. The series of incinerator are divided into the fuel and gas kind which can be selected according to the different needs of the users.

 

 

 

LDF-20 Model medical solid waste incinerator

 

Main parameters

 

Applicable hospital size (number of beds)	30-50
Burning Ability	10-20kg/times(daily incineration 3-6 times)
Size of the incinerator	1600×1200×1700mm
Volume of incinerator	Gasification room 0.26m3,secondary burning room 0.14m3
Size of the waste filling entrance	380x480mm
Chimney	Height 6m,out-radius Ø280mm
Air Blower	0.37kw
Auxiliary burner	Power 0.11kw,oil consumption volume 4-6kg/h
Re-burning burner	Power 0.11kw,oil consumption volume 4-6kg/h
Operation voltage	380V or 220V
weight	About 1500kg

 

 

 

LDF-20 Main configuration list

 

Equipments name	specification	quantity	unit
Furnace main body(first burning room)	A3 steel,refractory material	1	set
Auxiliary burner	power 0.11kw	1	set
Re-burning burner	Power 0.11kw	1	set
secondary burning room	A3 steel,refractory material	1	set
Mixing burning room	A3 steel,resist high temperature material	1	set
gas fume purify room	A3 steel,resist high temperature material	1	set
oil storage tank	steel plate	1	pc
Ash rake	DN20x100×100 mm length: 1.0m Steel tube and plate	1	pc
air blower	0.37 kw	1	set
ventilate pipe	A3 steel pipe	1	set
chimney	A3 iron pipe,out-radius  DN280mm height 6m	1	set
thermoelectric couple	Resist high temperature 1200°C	1	set
Electronic control system		1	set
installation attachment		1	set
Installation manual and video disk		1	set