Specifications

1)RO water from tap water directly
2)Output:10 or 20L/h
3)Certificate: CE

The Direct-Pure® RO lab water system produces reverse osmosis (RO) water from tap water directly.

Features:
• Electrical and water compartments are completely segregated, thus safer to operate.
• The Fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life detection as well as many other programs for convenient operation.
• The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
• User can set water dispensing time for easy water collection.
• The system is equipped with a 30-liter PE tank (upgradeable to a 60-liter) with a liquid level sensor.
• RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.

Main Applications:
Pure water can be used in many areas. Here are some typical applications.
• Manual cleaning and glassware rinsing
• Buffer preparation
• Glassware washers
• Humidifiers
• Water baths
• Aging tester
• Autoclave
• Laboratory animal feed
• Feed water for ultrapure water systems

 

Specification:

Feed Water Requirements
Tap water*	Municipal water, TDS < 1000 ppm (2000 μS/cm)
Operating Temperature	5~45 °C
Feed Water Pressure	15 - 60 psi (1 - 4 bar)
Product Water Flow Rate	10 or 20 L/h at 25°C
RO Rejection Rate
Monovalent ions removal	>95% (>99% with 2-Pass RO system)
Polyvalent ions removal	>99%
Bacteria and Particles removal	>99%
Organics and Pyrogens removal	>99%
Dimensions
Length x Depth x Height	30.3 cm × 51.2 cm × 48.2 cm
Net Weight (Operating Weight)	18 - 21 kg

*If water hardness is greater than 1000 ppm, We suggests using an additional water softening device to protect the RO membrane in your system.

Ordering information: 

Description	Catalog No.
Direct-Pure RO 10 Pure Water System	RD0R01000S
Direct-Pure RO 20 Pure Water System	RD0R02000S
Direct-Pure 2-Pass RO 10 Pure Water System	RD0R21000S

 

Cartridge Set is required for the water systems to function. Please contact us for detailed information.