oil water separator, grease trap used in restaurant

Introduction:

The Full stainless steel high efficient no power oil-water separator is an

environmental protection high newly product aiming at treating oily wastewater.

Our company produces the oil-water separator by adopting several item

environment protection technology,scientific treatment process and unique design,

according to proportion difference between  water and oil, made the oily particles

floating on the water surface after several time’s subcritical flow and the baffle’s

collision. With characteristic of multilevel processing and separating unit, adopting

the inclined board Oil separation technology and specific liquid level automatic

control technology, no need any power and additive, which can separate

the mix grease in oily wastewater automatically and centralize it to oil groove,

discharge it out automatically, the oil content of the wastewater can reach national

emission standard .

Operating principle:
Oily wastewater discharge into municipal drainage pipeline before treatment, will

form "ditch oil", which will cause much influence to drainage equipment and

municipal sewage  treatment plant. Such equipment is make the oily wastewater  

in the action of gravity, with the help of oil water proportion difference, adopting

nature flotation to separate and remove floating oil and parts of thin disperse oil,

by unique devise the inner structure of oil-water separator without power, according

to shallow pond sediment theory, apply different flow separation principle and

turbulent variable laminar flow of the dialectical relationship, make the wastewater

reduce flow rate, flow down, oil droplets floating when flow by oil-water separator.

Practice prove, such product can make the removal rate of grain size above 60um

floated oil above90%, the oily content of discharged sewage lower than the three

level standard (100mg/L) of <sewage integration discharge standard>

Technics Processing:

Characteristic

(1)High technique content: adopting to shallow pond sediment theory and

different flow separation principle and turbulent boundary layer theory, improve the

separate surface of unit pond, great improve oil –water separation efficiency, short

the wastewater retention time, reduce equipment volume, save occupy area and

budget.

( 2) No need electricity,power, save expense: only using the liquid level difference

when sewage flow by device, easy to realize the purpose of oil –water separation,

by using unique technics principle and structure design, reliable work, small

volume, long service life, no need add any agentia and drug, without second

pollution.

(3) Easy installation and maintenance,, no need person to maintenance operation,

only need discharge oil regular.

( 4) Apply to any kinds of oil, oil-taking concentration without any limit, can widely

used in natural petroleum and petroleum products,oil tar and oil tar fraction,

animal and plants oil  and wool grease etc wastewater project, specialized using in

catering industry oily wastewater treatment.

Application scope:

Widely used in hotel,restaurant,canteen ,food process factory etc animals ,

plants oily wastewater treatment, also can apply to oil field ,petrochemical,

ship,gas station,mechanical processing and coking etc contain mineral oil

industrial sewage treatment, can match with other water treatment device.

Installation :

The catering industry oil-water separation can divide as underground and ground

type.
a. if adopting underground type, the Civil foundation size is add 300-500mm in

original equipment’s length and width ,height add 50-200mm,the detailed size can

be decided according to the working condition. It should mortar 240mm width clay

red brick in the base of oil-water separation ,access hole and around oil salvage

mouth, with 1:2 cement mortar painted, cover plate adopt c20 concrete and 15cm

thick precast slab.

b. if set on the ground, place it in the ground level then connect with the pipeline.

Appliaction area: used in dining hall,restaurant,hotel,fast food chains etc.

Matters need attention:

1.simple installation,convenience,only need connect inlet and outlet is ok

2,the sewage inlet must be install separate slag net, be sure to make the whole

oil-water separator in the same level, the first time using oil-water separator, its

separate oil case should be inject enough clean water after installed it, then

connect 220V power. clear several times of separate slag case and separate oil

case each day, ensure Water flow gently smooth and raise separate oil effect, must

switch off power before clear it.

3. it need thorough clear the separate slag case and separate oil case each month

at least 1 time, clear up the sediment and oil sludge, check the electronic control

parts whether work normal , it need fill up clean water after clear.

Trade Term :
MOQ: 1 SET Loading Port: Qingdao
Delivery Term: 10 days from receive the Payment
Payment Terms: T/T, 100%,or 30% prepayment, 70% before deliver