Product Details

Product Description

Packaged insutrial waste water treatment plant

Description:

package sewage treatment plant for treatment of sewage water. The system is based on the High-Speed bio-degradation using MBBR( Moving Bed Bioreactor) and Microfiltration using Membrane, which is unique due to its compactness and performance in respect of volumetric efficiency and high quality recycling water to match most stringent norms in terms of BOD and TSS. These technologies are combined in a prefabricated; skid mounted and standardized tank system with variable length, suitable for overseas transportation in ISO freight containers.

Benefits

Very stringent norms achieved at BOD<10 mg/l, TSS<10 mg/l

Very compact & occupy very less space than other sewerage treatment plants.

Less maintenance, Low capital & Operation cost

Simple assembly and operated by on site labor

The system is prefabricated and mounted in ISO freight containers and no larger than standard ISO containers

Easily transportable to any location unlike other conventional treatment plants

There is no need to add micro organism

The system will operate without any chemical addition

Easy start up, fully automatic operation, reliable & robust once started

One central control panel for easy operation.

Clog free air distribution system and bio media that comes with 20 years warranty

Ammonia and nutrient removal system available upon request.

Specifications

package plants are fully automatic systems with automatic sludge separation. Main components pre-assembled and tested before shipping

The basic system comes with the following standard equipment

Main Bio Reactor Tank with three chambers. Epoxy coated.

Bio Media 450 m2 /m3. 20 Years warranty.

Course Air Distribution systems with butterfly valves, coarse air, No clogging.

Non-Return valves (Check valves)

Necessary Cables & Accessories

Microfiltration.

Rotary Displacement Blower.

Submersible Feed Pump.

Displacement Sludge / Recycling Pump.

Automatic sludge separator.

Dosing pump

Necessary PVC Piping & valves

Motor Control Panel.

Complete plant Promax Hybrid STP as per requirements.

One main electrical switchboard/control panel with start/stop push buttons and running lights.

Features

We have made a sincere effort to incorporate our past experience in our product, which has made it elaborate & comprehensive. We have incorporated several world class, renowned equipment / instruments, which are time, tested, both at home & abroad. An utmost care has been taken for selection of proper material of construction of each component in our package plant system, as we believe that appropriate selection of materials is vital in such a sophisticated system.

The Promax STP system is based on the High-Speed bio-degradation and sedimentation using MBBR technology, which is unique due to its compactness and performance in respect of volumetric efficiency and high quality outlet water with turbidity less than 1 NTU. These technologies are combined in a prefabricated; skid mounted and standardized tank system with variable length, suitable for overseas transportation in ISO freight containers.

Applicable

Municipal Waste water

Restaurant and kitchen waste water

Industrial effluent treatment

Nutrient removal

Capacity increase

Plant modification and expansion

Manufacture details:

Carbon Steel surface finish and corrosion treatment

1. Sand Blasting/ Shot Peening, ISO Sa≥2.5,epoxy Zinc Rich Primer, 50μm/coat.

2. Internal: a) Epoxy Zinc-rich Primer, 50μm/coat×1;

b) Epoxy Mastic Paint, 100μm/coat×2~3;

c) Total film thickness: ≥250μm.

3. External: a) Epoxy Zinc-rich Primer, 50μm/coat×1;

b) Epoxy Micaceous Iron Intermediate Paint, 50μm/coat×1;

c) Polyurethane Finish, 50μm/coat×1;

d) Total film thickness: ≥150μm.

Spraying Method: High-Pressure Airless Spraying

Device Color: Light Sea Blue (PANTONE No.RAL5015),or according to customers’ demands.

Standards for Interface Flange

China: JB/T81-1994, PN 1.0

America: ANSI 150

Japan: JIS 10K

Benefits

Very stringent norms achieved at BOD<10 mg/l, TSS<10 mg/l

Very compact & occupy very less space than other sewerage treatment plants.

Less maintenance, Low capital & Operation cost

Simple assembly and operated by on site labor

The system is prefabricated and mounted in ISO freight containers and no larger than standard ISO containers

Easily transportable to any location unlike other conventional treatment plants

There is no need to add micro organism

The system will operate without any chemical addition

Easy start up, fully automatic operation, reliable & robust once started

One central control panel for easy operation.

Clog free air distribution system and bio media that comes with 20 years warranty

Ammonia and nutrient removal system available upon request.

Specifications

package plants are fully automatic systems with automatic sludge separation. Main components pre-assembled and tested before shipping

The basic system comes with the following standard equipment

Main Bio Reactor Tank with three chambers. Epoxy coated.

Bio Media 450 m2 /m3. 20 Years warranty.

Course Air Distribution systems with butterfly valves, coarse air, No clogging.

Non-Return valves (Check valves)

Necessary Cables & Accessories

Microfiltration.

Rotary Displacement Blower.

Submersible Feed Pump.

Displacement Sludge / Recycling Pump.

Automatic sludge separator.

Dosing pump

Necessary PVC Piping & valves

Motor Control Panel.

Complete plant Promax Hybrid STP as per requirements.

One main electrical switchboard/control panel with start/stop push buttons and running lights.

Features

Applicable

Municipal Waste water

Restaurant and kitchen waste water

Industrial effluent treatment

Nutrient removal

Capacity increase

Plant modification and expansion

Manufacture details:

Carbon Steel surface finish and corrosion treatment

1. Sand Blasting/ Shot Peening, ISO Sa≥2.5,epoxy Zinc Rich Primer, 50μm/coat.

2. Internal: a) Epoxy Zinc-rich Primer, 50μm/coat×1;

b) Epoxy Mastic Paint, 100μm/coat×2~3;

c) Total film thickness: ≥250μm.

3. External: a) Epoxy Zinc-rich Primer, 50μm/coat×1;

b) Epoxy Micaceous Iron Intermediate Paint, 50μm/coat×1;

c) Polyurethane Finish, 50μm/coat×1;

d) Total film thickness: ≥150μm.

Spraying Method: High-Pressure Airless Spraying

Device Color: Light Sea Blue (PANTONE No.RAL5015),or according to customers’ demands.

Standards for Interface Flange

China: JB/T81-1994, PN 1.0

America: ANSI 150

Japan: JIS 10K

Packaging & Shipping

Our Services

1. Detailed installation manual and maintenance guideline are provided with the equipment.

2. Technical training and site-commissioning are available for you.

3. Any equipment issue, we will stand by. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.

FAQ

1.Q:Are you a factory or trading company

A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.

2.Q:Where is your factory located? How can i visit there?

1. A: Our factory is located in Hai Bin Five road,Jiao Nan,Qingdao City, Shan dong Province,China. It is about 1 hours from Qingdao Liuting airport. We can pick you up if you need, welcome to visit our factory.

3.Q: Do you have minimum order quantity request?

A: No minimum order, but it can get a discount if you order a large quantity.

4.Q: Do you have certificates?

A: Yes, we have ,CE ,ISO,SGS certificate.

5.Q: Can you meet my special requirements for my products?

A: Yes, we have a professional design team. We can provide drawings according to your requirements.

6. Q:How to buy your idea products?

A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).

7. Q:How to pay?

A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.

8. Q:What is the delivery time?

A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

9. Q: How to pack the products?

A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

10. Q: How to keep your equipments from corrosion?

A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.

11. Q: How do you manufacture your equipment ?

A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.

12. Q:How to install after the equipments arriving destination?

A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.

FAQ

1.Q:Are you a factory or trading company

A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.

2.Q:Where is your factory located? How can i visit there?

3.Q: Do you have minimum order quantity request?

A: No minimum order, but it can get a discount if you order a large quantity.

4.Q: Do you have certificates?

A: Yes, we have ,CE ,ISO,SGS certificate.

5.Q: Can you meet my special requirements for my products?

A: Yes, we have a professional design team. We can provide drawings according to your requirements.

6. Q:How to buy your idea products?

A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).

7. Q:How to pay?

A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.

8. Q:What is the delivery time?

A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

9. Q: How to pack the products?

A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.

10. Q: How to keep your equipments from corrosion?

A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.

11. Q: How do you manufacture your equipment ?

A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.

12. Q:How to install after the equipments arriving destination?

A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.