Bar screens are typically at the headworks (entrance) of a wastewater treatment plant (WWTP), bar screens are used to remove large objects such as rags, plastics bottles, bricks, solids, and toy action figures from the waste stream entering the treatment plant. Bar screens are vital to the successful operation of a plant, they reduce the damage of valves, pumps, and other appurtenances.  Floatables are also removed at the entrance to a treatment plant, these are objects that "float" on the surface of the water and if aren't removed end up in the primaries or aeration tanks. It is not uncommon to see floatables hanging over the weirs of some clarifiers. Though they don't diminish the function of those processes, floatables are rather unsightly. 

As a special equipment,it can be widely used in the belows:

• Headworks on wastewater plants
• Industrial pre-screening
• Septage receiving
• U-Drain screens
• Self-contained packaged screening systems with optional grit removal.
• Fine screening - Screens can be supplied down to 1mm in bar spacing.
• Storm Water screens

                   

YMGS Mechanical Bar Screen has the below advantages:

• High Automaticity-can work continuously without any operation         
• High Separative Effiency
• Low Power Consumption
• No Noise
• Good Corrosion Resistance
• Self-Protection---when overload,it will give sound-light alarm and stop working automatically
• Can work based on different setting
• Self Control and Manual Control
• Self Cleaning

The Mechanical Bar Screen is composed of driven device,rake tooth facility,flush facility,which is assembled by a special rake tooth into a group of rotary grille chain.

Under the drive of motor reducer,the rake tooth chain turn Rotary motion as reverse flow.When it get the top,the guiding power of the geneva wheel and curve will make every rake tooth to do the relative self-cleaning motion,then due to the gravity,most of the solid will drop down. The sundries sticking in the rake tooth will be cleaned up by sweeper's reverse movement.

• The depth of Ditch will be customized as the buyer's requirement.
• Diversion trench Length(mm)=1500+Hxctga
• Medium maxi temperature(°C)=less than 80 degree
• foot margin to discharging top mouth height H(mm)=400~1000m

The mechanial bar screen need the below Accessories

The whole processing is as below:

To protect the equipment in good condition,the paper carton and plastic film will be wrapped outside,as the below picture shows:

Our production has ISO9001:2000 & CE certifications.

Qingdao Yimei Environment Project Ltd. is found in 1988.We are located in the largest port city-Qingdao China. Our factary take up 36,000 square metres and there are more than 130 kinds machine for manufacturing. As a member of Shandong Province Environmental Protection Industrial Association, we have 360 staff and  72 experienced engineers.

Our main product is the equipment for Environment Protection and Waste Water Treatment.And the product is popular all over the world,such as Africa, North America,Domestic Market,Eastern Asia,Mid East.