ADSS cable tension clamp

Application

Tension set for ADSS cable is used to connect cable and pole or tower for ADSS cable line, and clamp

can protect cable and help cable to reduce vibration.With preformed rods' special design,it can keep

tension clamp not produce the  stress concentration which damage ADSS cable and keep cable normal

use.

Structure&Materials

Shackle:

Hot galvanized steel shackles play a role in connection with the tower fasteners. Failure load: U-7 to 70kN,

U-10 to 100kN, U-12 to 120kN.

Preformed tension rods:

Be made of galvanized steel wire or aluminum clad steel and preformed into the process when

prefabricated beam, inner wall layer of emery stick, and enhance the friction between clamp and cable.

Tension rods:

Galvanized steel precision, the heart-shaped tension ring and shackle connected to avoid strain clamp

 too close to the exit of cable from the pole, keep the cable bend radius large enough.

Heart-shaped tension ring:

Galvanized steel precision, clip embedded in the U-bend Clamp head, the protection Clamp connection

with the extension rod. Failure load is 40kN, 70kN, 100kN and 120kN, etc..

Preformed armour rods:

Galvanized steel or aluminum clad steel wire, preformed armour rods wall sticky particulate silicon carbide

 to increase friction and reduce the pressure on the cable side. preformed rods  when the pre-processing

 into several sub-beams, to avoid installation errors and to facilitate rapid installation. Preformed wire toward

the end of different specifications according to the radial lateral bending, to avoid vibration in the breeze under

the cable clamp at the end of the friction and prevent damage to cable extrusion.