TECHNICAL DATA

Inlet diameter :                                φ0.10mm~φ0.40mm

Applicable materials :                      hypoxia or oxygen free copper wires,

Tin-coated method :   single furnace hot-dip coating, the dies scrape the tin, capacity of the furnace is 150KG.

Line speed :                                    0 ~ 300 m/min.

NO. of wires :                                   20

Size of tinning dies :                       diameter Ø25mm×8mm thickness

Pay off bobbins :                            Ø300mm/Max (offered by buyers)

Pay off method :                             plates with brushes. (Not included in the offer)

Take up bobbin :                            PT10 ~ PT25

Installed gross capacity :                55KVA

Power consumption :                      50KW

Features:

- It can tin-coat for 20 wires at the same time.

- The whole process for tinning is using dies, the tinning dies can be both tungsten carbide dies and diamond dies.

- The tin furnace and the annealing warm-keeping device is researched and designed by experts. It saves power and temperature is uniform.

- with a haul-off capstan, and equipped with an inverter, no limit of speed, the speed can be adjusted freely.

- The take up is designed into horizontal type; it is easy and convenient to unload bobbins.

- The take up machine is designed in single layer. It is divided into left and right sides, and equipped a set of traverse devices. It can wind different tin-coated wires of similar diameter at the same time.

Haul-off capstan 

The pay-off