RG-FS150H1-KC7 LED Follow Spot Light
Specification
1 Signal knob with self-control
2 Stand-alone control mode
3 High-intensity air-cooled system
4 Strobe 1-7 times/seconds
5 Light speed angle 23 degrees
6 Aluminum edging shell
7 Factory price
8 OEM is acceptable
9 Indoor using
Item NO. | RG-FS150H1-KC7 |
LED Qty | 150W led Lamp bead |
Rated Power | 150W |
Input Voltage | AC 200-240V 50/60Hz |
Color | Acolor wheel 6 colors + white, patterns can be customized |
Control signal | Signal Knob with self-control |
Control mode | Sand-alone mode |
Cooling system | Hgh-intensity air-cooled |
Iris Effect | Aperture size adjustable |
Strobe | 1-7 times / second strobe |
Color Correction | Nrmal 5600k, raised 6000K, 3200K lowered |
Light speed angle | 23 degrees |
Security measures | Compliance with various safety standards, IP20 protection class, power cord breaks Close CE20 / 22 three standard, high temperature protection device automatically cut off |
Shell | Auminum edging |
Dimensions | 680X320X300MM |
Net weight | 6Kg |
Ambient temperature | -20℃~+40℃ |
Environment | Use indoor |
Product pictures
Workshop
Fair pictures
1. Safety Instructions
We've put the device in advance transferred intact state. In order to maintain this condition and ensure safe operation, the user absolute requirement to comply with the safety instructions and warnings written in terms of manual species.
Important Notice: Due to neglect this manual caused damage within the scope of our responsibility. Dealer is not responsible for failures and problems arising therefrom.
l If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature. This device falls under protection-class I. Therefore, it is essential that the device be earthed.
l The electric connection must carry out by qualified person.
l The device shall only be used with rate voltage and frequency
l Make sure the power cord is never crimped or damaged by sharp edges .if this would be the case, replacement of the cable must be done by an authorized dealer.
l Always disconnect from the mains , when the device is not in use or before cleaning it .only handle the power cord by the plug .Never pull out the plug by tugging the power cord
l During initial start-up some smoke or smell may arise .this is a normal process and does not necessarily mean that the device is defective, it should decrease gradually.
l If the external flexible cable or cord of these luminaries is damaged, it shall be replaced immediately.
2. Operation Instruction
Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes .So make sure to operate the fixture until it is in normal temperature.
l This light should be keep away from strong shaking during any transportation or movement.
l Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.
l Don’t expose the fixture in overheat, moisture or environment with too much dust when installing it. And don’t lay any power cables on the floor. Or it might cause electronic shock to the people.
l Make sure the installation place is in good safety condition before installing the fixture.
l Make sure to put the safety chain and check whether the screws are screwed properly when installing the fixture.
l Make sure the lenses are in good condition. It’s recommended to replace the units if there are any damages or severe scratch
l Make sure the fixture is operated by qualified personnel who know the fixture before using.
l Keep the original packages if any second shipment is needed.
l Don’t try to change the fixtures without any instruction by the manufacturer or the appointed repairing agencies.
l In is not in warranty range if there are any malfunction from not following the user manual to operate or any illegal operation ,like shock short circuit ,electronic shock ,lamp broke ,etc.
Ambient temperature
-20℃~+40℃
Environment
Use indoor
why choose us??
-Price: we are factory and able to offer better price than trade company.
-Good quality: We are Golden suppliers and we are experienced in quality control.
-On time delivery: delivery the goods in the confirmed time.
-Professional seller: good communication in patient and well know our products.
-OEM: welcome.
Shipping Terms:
By express: DHL, Fedex, Ups, EMS, TNT from Guangzhou
By air: From Guangzhou or Hong Kong to ....
By sea: From Huangpu or Hong Kong to ...
We are your best choice,good quality and good serviceis our best respect for you.
Add me on skype: sales9_
Welcome to send inquiry and chat with me.I am waiting for you!