Specifications

Spiral chute separator is the best equipment for mining and ore beneficiation especially for sand mining in the coast, riverside

Introduction to Spiral Chute Separator

Spiral chute separator is the best equipment for mining and ore beneficiation especially for sand mining in the coast, riverside, sand bank and creek road. This product features reasonable structure, simple installation, small occupation area, simple operation, stable operation, large processing capacity, high recycle rate and reliable operation. In addition, it also features light weight, damp proofing, rust protection, corrosion protection and no noise.

Structure of Spiral Chute Separator

Spiral chute separator is composed of feeding ore homogenizer, tripod, feed chute, spiral flute, interception tank, concentration bucket and tank support.

Utilization Method and Working Principle

Because the spiral chute is working by taking advantages of gravity, it is also called construction chute or gravity spiral chute.

The spiral chute stands to adjust vertical line, and then the spiral chute can be fixed in the proper position by brandreth or wood. The mineral sand is sent to the two feeding ports by sand pump, and then the water is added to adjust the density of ore oar. A centrifugal force is produced at the flow rate of spiral slope due to the fact that ore oar flows from the high place. The mineral and sand is separated through the gravity and centrifugal force caused by spiral flow. The concentrate flows out from the pipeline to the concentrator and the tailings are sent to the sand pool. Finally, the ore beneficiation is finished.

  

Specification		5LL-1500	5LL-1200	5LL-900	5LL-600	5LL-400
Spiral Diameter (mm )		1500	1200	900	600	400
Spiral Pitch (mm )		720/540	900/720 /540	675/540 /405	450/360 /270	240/180
Ratio of Pitch To Diameter		0.48/0.36	0.75/0.6 /0.45	0.75/0.6 /0.45	0.75/0.6 /0.45	0.6/0.45
Lateral  Obliquity		9°	9°	9°	9°	9°
Starts		4	4	4	3	2
Feeding Sizes (mm )		0.8-0.037	0.3-0.03	0.3-0.03	0.2-0.02	0.2-0.02
Feeding Density (%)		30-60	25-35	25-55	25-55	25-55
Capacity (t/h )		6-8	4-6	2-3	0.8-1.2	0.15-0.2
Dimension (mm )	Length	1600	1360	1060	700	460
	Width	1600	1360	1060	700	460
	Height	5300	5230	4000	2600	1500
Weight  (kg  )		800	600	400	150	50