Alloy steel seamless hydraulic cylinder tubing is a kind of smooth bore precision seamless steel tube used to produce hydraulic cylinder barrels. We use hydrulic cold drawing technology,honing technology,and skiving and roller burnishing technology to manufacture alloy steel seamless hydraulic cylinder tubing.

Commodity: alloy steel seamless hydraulic cylinder tubing

Standard specification&material: EN10305-1 25CrMo4,42CrMo4, ASTM A519 SAE4130,SAE4140,etc.

Size range:40mm*30mm - 480mm*450mm

Manufacture method: cold rolled, hydraulic cold drawn

Delivery condition: 

Internal surface treatment method: honing or skiving and roller burnishing

OD tolerance: as per EN10305-1

ID tolerance: H7,H8,H9,H10 or given by customer.

W.T tolerance(eccentricity): +/-5%

Bore roughness(Ra): 0.4um max.

Chemical composition requirement of E355 material:

Mechanical properties of E355 tubes:

Packing: tubes will be packed in bundles tied with steel strips. Slightly internal and external oil coating for anti-rust protection. End plastic caps. External packing by knit bags.

Marking on each piece of tube: to be confirmed.

Mechanical stamp on each piece of tube can be provided.

Shipping: by containers.

We are ISO9001-2008 certified manufacturer of hydraulic cylinder tubes and hydraulic cylinder barrel with annual capacity of 12000 tons of hydraulic cylinder tubes.  

External machining or external polishing service can be provided.  

End machining service can be provided.

Payment: 30% deposit,balance before shipment or against copy of B/L or L/C at sight.

MOQ: 4 tons for each size.

Warranty: 1 year after receipt of tubes.  

Trade term: FOB,CFR,CIF,or DAP.

Third party inspection or customer's inspection is acceptable.

Manufacture procedure: raw material (hot rolled seamless steel pipes) - heat treating - pickling,phosphating,lubrication - hydraulic cold drawing (or further cold rolling) - heat treatment - cutting.