Product Details

Specifications

stainless steel power source
1.built-in EMI fiter with tiny ripple
2.have over load,over voltage protection
3.2 years warran

stainless steel power source

1.specification:

1.international AC input range

2.high efficiency, low working temperature

3.soft- start circuit, limiting AC surge current soft-start

4.short circuit, overload, over voltage protected

5.Built-in EMI filter, low ripple noise

6.low cost, high reliability

7:Constant voltage output

8:Output current accuracy:5%

9:Power efficiency:>85%

10:Power factor (PF):>0.95

11:Ambient humidity:80% non-condensing

12:Mean Time Between Failure:>30000h

13:2 years warrantytectio

14.Conform to EN60950 GB4943 UL60950 Safety standards

15.Conform to CB9254 EN55022 EMC Standards

Model		PS250-W1V	PS250-W1V	PS250-W1V
output	DC voltage	12V	24V	48V
	Voltage tolerance	±2%	±1%	±1%
	Rated current	20A	10A	5.2A
	Current range	0~20A	0~10A	0~5.2A
	Rated power	250W	250W	250W
	DC voltage ADJ.range	-9%~+10%	±10%	±10%
input	Voltage range	85~132VAC/170~264VAC(selected by switch)
	frequency	47~63HZ
	AC current	5A/115VAC 2.5A/230VAC
	efficiency	81%	84%	85%
	Inrush current	Cold start current 25A/115 50A/230V
	Leakage current	< 3.5mA/240VAC
protection	overload	Rated output power105%~135% start over load protection
		protection type:cutoff output,auto-recovery
	over -voltage protection	-----
		-----
environment	Working temp,humidity	-10°C~+60°C,20%~90%RH
	Storagetemp,humidity	-20°C~+85°C,10%~95%RH non-condensing
	Withstand vibration	10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
safety	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	Comply with EN55022,UL60950
	Weight/packing/size	0.52kg/50pcs/26kg/1599949(mm)
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation