SANPU CE ROHS LP 60W 12V led waterproof multiple voltage dc power supply
USD $1 - $20 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
Features:
1. LP 60W 12V led waterproof multiple voltage dc power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7 High efficiency .
8.International AC input .
9.Built-in EMI fiter .
10.100% full load burn-in test .
LP Plastic Waterproof LP60-W1V | ||||||
MODEL | 12V 60W | 15V 60W | 24V 60W | 27V 60W | 48V 60W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 27V | 48V |
RATED CURRENT | 10A | 5A | 4A | 2.5A | 1.3A | |
CURRENT RANGE | 0~10A | 0~5A | 0~4A | 0~2.5A | 0~1.3A | |
RATED POWER | 60W | 60W | 60W | 60W | 60W | |
RIPPLE& NOISE (MAX.)NOTE2 | 100mV | 100mV | 150mV | 150mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | ±1% | ±1% | |
SETUP , RISE TIME | 200ms/220VAC 100ms/220VAC | |||||
HOLD UP TIME(Typ.) | 30ms/220VAC | |||||
INPUT | VOLTAGE RANGE | 85~264VAC | ||||
FREQUENCY RANGE | 47~63Hz | |||||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||||
EFFICIENCY(Typ.) | 82% | 85% | 86% | 87% | 87% | |
AC CURRENT(Typ.) | 1.3A/115VAC 0.7A/230VAC | |||||
INRUSH CURRENT(Typ.) | COLD START 36A/230VAC | |||||
PROTECTION | Short circuit | Protection type : recovers automatically after fault condition is removed | ||||
Over load | 115~135% hiccup mode , auto-recovery | |||||
Over voltage | ≥85%°C cut off the output, auto-recovery | |||||
ENVIRONMENT | WORKING TEMP | -20°C~ +60°C | ||||
WORKING HUMIDITY | 20%~90%RH | |||||
STORAGE TEMP , HUMIDITY | -40°C~+85°C,10%~90%RH | |||||
SAFETY & EMC | SAFETY STANDARDS | CE,ROHS IP67 | ||||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | |||||
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | ||||||
NOTE | 1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr . 3.Tolerance : includes set up tolerance , line regulation and load regulation . | |||||
Introduction
Certificates
Packing
LogisticsPayment